Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Technician tonerjunky's Avatar
    Join Date
    Dec 2010
    Location
    Lincoln
    Posts
    23
    Rep Power
    20

    MXFNX9 Stapling Issue

    I have a MX5111N with a MXFNX9 internal finisher that is not stapling the entire set. It originally was completely missing the bottom sheet of each set and sometimes the second sheet as well. I replaced the take belts and both sets of rollers which usually takes care of this issue. Now it is consistently missing the bottom sheet by about 1 to 2 mm. Any thoughts would be appreciated.

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Oct 2011
    Posts
    163
    Rep Power
    19

    Re: MXFNX9 Stapling Issue

    there was a manual adjustment i was shown in school that can fix that but it was too long ago and i don't remember. contact your local sharp tech rep if tech hotline doesn't know

  3. #3
    Trusted Tech 50+ Posts drowranger's Avatar
    Join Date
    Jul 2015
    Posts
    73
    Rep Power
    10

    Re: MXFNX9 Stapling Issue

    giving a good clean to Knurling belts and transport rollers might fix this. also do the new fnx9 fw 02.01

  4. #4
    Junior Member
    Join Date
    Feb 2015
    Location
    akron,ohio
    Posts
    1
    Rep Power
    0

    Re: MXFNX9 Stapling Issue

    I use wd40 to clean the belts and rollers it helps.

  5. #5
    Trusted Tech 50+ Posts skookumchuck's Avatar
    Join Date
    Feb 2012
    Posts
    62
    Rep Power
    17

    Re: MXFNX9 Stapling Issue

    Hey, Just did a repair on this. I have been able to fix it with replacing the rollers on the shaft with the two gray belts on it. It's really fun, I would recommend a good picture before taking stuff off the shaft. Stuff only comes off from one end so 90% of the stuff comes off to get one of the rollers on. There is also a bulletin that shows a crapload of other parts that could/should be replaced as well. I just used the gray belts, the rollers on the same shaft as the gray belts and the final exit rollers.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here