MX2600n Icum:ROM UNUSUAL

[repn1999]

Here you go. Pay close attention to the renaming of the firmware file.



Environment necessary for the emergency update]
1) The MFP with the HDD where the firmware is rewritten
2) The USB memory which stores the firmware for the emer-
gency upgrade.
File name: emupdate_p2.sfu
* The firmware must be stored in the root folder of the USB
memory.
[Emergency update procedures]
1) Insert the USB memory which stores the firmware for the
emergency update into the USB port.
2) Turn on the main power.
The firmware for the emergency update in the USB memory is
automatically recognized to start reading the USB memory.
It takes about 1 minute, and the booting animation is displayed
during this period.
3) Check to confirm that "EmergencyUpdateMode" is displayed
on the panel.
After that, the process is automatically executed.

[sharpcopy]

Thank you so much.....renaming of the firmware file took me for a loop....thanks again I really appreciate

[mojtabamrt]

hi guys
i have same problem to sharp mx-2301n
not ready to print
in display write a message : Version Check IcuM:ROM UNUSUAL
pls help me soon guys
thanks alot
good job
mojtabamrt

[Phil B.]

hi guys
i have same problem to sharp mx-2301n
not ready to print
in display write a message : Version Check IcuM:ROM UNUSUAL
pls help me soon guys
thanks alot
good job
mojtabamrt

hey ..thanks for digging up a 2yr old DEAD THREAD..

and your machine isn't even the same MODEL!

START YOUR OWN DAMN THREAD NEWBIE

AND THEN GO READ THE FORUM RULES FOR CTN!