Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23
  1. #21
    Technician superssport's Avatar
    Join Date
    Apr 2009
    Location
    Oakley, Ca.
    Posts
    11
    Rep Power
    23

    Re: MX-3070-4070-5070-6070N

    Went out to one yesterday to help a tech. Was said to constant jamming for months . It would jam right at the entry of the finisher. I looked up at the photo sensor at the entry of the finisher and it look foggy. Cleaned sensor and now it's jam free. Tech called later that afternoon and still no jams.

  2. #22
    Senior Tech 100+ Posts
    Join Date
    Jun 2016
    Posts
    159
    Rep Power
    10

    Re: MX-3070-4070-5070-6070N

    I had a machine with internal finisher which sometimes gave POD2_S.

    Turned out the plastic inlet guide of the punchunit was uneven. Production error i guess.

    I had to disassemble it and with a bit of fine sandpaper make it smooth again...

    No more jams after that.

  3. #23
    Trusted Tech 50+ Posts
    Join Date
    Oct 2014
    Location
    salisbury
    Posts
    86
    Rep Power
    12

    Re: MX-3070-4070-5070-6070N

    Quote Originally Posted by jerrysandstrom View Post
    Hi
    I hade the same problem with internal finisher it was jamming on FNPS1_S .check out the bulletin, i changed the spring in finisher and it worked for me.

    //Jerry
    Sweden
    The old inner finishers didn't have the mylar strips that are included in the new ones. Tech pub about adding the mylar strips
    to prevent jams. Have had many of these that needed the mylar strips installed on the inner finisher.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here