I was wondering if the admin password can be reset if the MX-3070N. I have a customer where there IT department changed the admin password and lost it. I am currently locked out of the admin settings and cannot find a admin password reset in the service mode for this model.
How can i reset the password to his default ? (admin)
Not 100% certain, and couldn't find anything in the manual. But today's increased security on everything....pretty sure there is a dip switch on the mfp board that you can flip, reboot, and have PW changed. I'd take a look to see if you can find that. Or call Sharp direct.
i will try the dipswitch trick, i had called sharp but they dont let me know the reset trick. it was only for sharp certified employee's.Originally Posted by copierdude1114
I haven't done it on any of the newer models, but there is nothing in the sim modes, so that has to be the way! Let us know how it goes
I was on location and i found 1 dipswitch on the mainboard (see the red circle) this one was for the touch screen calibration.
I can't find the other one, where is it located??
Thank You, i switched both down and i came into the touch screen calibration, so i need set only the right dipswitch down ?
Yes, switch only the right side, keep the left as it was. Make sure to switch it back once you're done.
MX-3070N Password reset
Thank you, but i havent register an email adres, so when i aquire a reset code, where is it send to ?
or where can i define that email address ? must i register the sharp printer by sharp with his serial number?
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks