OSX 10.14 Mojave + Sharp MX2310

[dj427]

Hello - we're still waiting on the firmware update for our MX-2600N. Does anyone know if it has been issued yet? I know that it was issued for some of the other models that were affected. Our local vendor that performs the updates has not been helpful.

Thanks

[mansart]

MX2600 introduced in 2008, I would not hold my breath for either new firmware and/or new drivers for that model.

[jon jennings]

The new drivers are available on IDNC.

[Guillaume]

The new drivers are available on IDNC.

Excuse me, could you explain me what is IDNC (as you can feel, i'm not english native !)

[OlliK1969]

IDNC is a Sharp tech site

[Guillaume]

Many thanks.
It's a private server, i can't have access...
Could you confirm that there is the driver for the MX2310U for Mojave ?

If you can confirm, i will go to the nearest sharp shop to negociate something...

Many thanks for your help, you might save my life (or at least, my printer !)

[ntbann]

MAC OS Driver Package Contains: Mac OS 10.4-10.9 Print Drivers Software for MX2600N

Contains: Mac OS 10.4-10.9 Print Drivers

MX-2600N

From Sharp-usa.com

[Leebs14]

Hi there, had this exact same problem yesterday with a MX2310 which worked fine until they updated to Mohave. Its the Preview program built into Mohave it doesn't seem to be able to handle printing PDF's with images on corectly. If you open the exact same document with Adobe reader and print the document will print fine. We downloaded a free version of Adobe reader and the customer now uses that and it works fine

[Guillaume]

The new drivers are available on IDNC.

With the driver, there is a "read-me" that tell : " NOTE: For Mac OS 10.14 Mojave Firmware Must be Downloaded and Installed."

Could you help me to manage that ?

[Guillaume]

Hello,
Here is some news,

I tried to install the driver from IDNC : no success (there is a read me inside that tell to update the firmware, but i haven't...)
So i looked for different drivers... :
- on siica.sharpusa.com : the only driver is for 10.10 to 10.13
- on sharp.fr : no driver, contact your reseller (if my reseller have had the solution, i won't be trying myself !)
- on sharp-world, without choosing a region : driver from 10.10 to 10.14 HA HA ! >> MX-C26c_1811a_MacPS.dmg (the older one is C26b). But disk image unmountable !
- on sharp.de : driver from 10.10 to 10.14 >> MX-C26c_1811a_MacPS.dmg, date : 13 MAY 2019 Yes !!!
I delete the printer from CUPS, install the driver, create the printer....
Still blurry...

My firmware are:
ICU (main) 07.00.G1
ICU (boot) 01.03.G1
ICU (sub) 01.09.G1
PCL (main) 05.00.G1
PCL (profile) 01.00.G1

Does anyone knows if there is an update for the firmware, and where i could get it ?
Such a shame my mfp won't work only for a firmware update problem...