Results 1 to 4 of 4
  1. #1
    Field Supervisor 500+ Posts
    MX5141 w\FN18 saddle stitch

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    843
    Rep Power
    54

    MX5141 w\FN18 saddle stitch

    Customer running a saddle stitch job and machine runs out of staples in the rear saddle stitch stapler.

    Staples replaced.....

    Now machine will pull a sheet from tray one and run it as if it is going to saddle stitch. ( I assume it is doing this to advance new staples into staple head)

    However machine shows jam that does not reset.

    Has any one seen this?

    TIA

  2. #2
    Trusted Tech 50+ Posts
    MX5141 w\FN18 saddle stitch


    Join Date
    Aug 2011
    Location
    Milford,ohio
    Posts
    76
    Rep Power
    26

    Re: MX5141 w\FN18 saddle stitch

    The one sheet being feed is to prime stapler, do both sides staple when priming? If one is not that could be the cause for jam.

  3. #3
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: MX5141 w\FN18 saddle stitch

    Remove the saddle stitch staple cart and look into the cavity it sits in. At eh bottom is a very small black door, it is the cart present sensor. I have seen these pop off and give similar issues. Also, not sure why, but it seems to like Legal sized paper for the priming. Just something I have noticed over the years.


    Failing to plan is planning to fail!!!

  4. #4
    Field Supervisor 500+ Posts
    MX5141 w\FN18 saddle stitch

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    843
    Rep Power
    54

    Thumbs up Re: MX5141 w\FN18 saddle stitch

    Got it....Turns out FSPDD sensor was bad. What threw me off track was the fact that when machine was put into No Misfeed detect, machine would tell me to "Put Saddle stitch staple unit:" into correct position......from there I "Zigged" when I should have "Zagged". Once again turning a relatively simple problem into a complex one.

    Thanks

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here