Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    Trusted Tech 50+ Posts
    MX-C300w keeps rebooting when network cable is plugged in


    Join Date
    Oct 2016
    Location
    Grand Island, NE
    Posts
    74
    Rep Power
    7

    Re: MX-C300w keeps rebooting when network cable is plugged in

    Quote Originally Posted by Phil B. View Post
    my bad... I ASSumed that "Printing 101" class had been covered. Yes this should be checked.. but the IT Dept (hopefully) would notice that.

    This made me chuckle a bit. Yes, the IT Dept "should" be able to find a bad print job, but in my experience, most of the IT guys I deal with aren't too bright. Haha!

  2. #12
    Senior Tech 250+ Posts
    Join Date
    Feb 2014
    Location
    Bristol
    Posts
    310
    Rep Power
    15

    Re: MX-C300w keeps rebooting when network cable is plugged in

    Hi there, I had a similar problem with one of these machines where it wouldnt reboot but it would just lock up, no buttons worked on the ops panel or anything once the network cable was plugged in. In the end we changed the IP address to something different and it worked fine, we then put it back to the original IP and it locked up again - Weird. So we simply changed the IP address and reset the pc's to print to the new address and it has been working fine ever since.

  3. #13
    Field Supervisor 500+ Posts kingarthur's Avatar
    Join Date
    Feb 2008
    Posts
    758
    Rep Power
    35

    Re: MX-C300w keeps rebooting when network cable is plugged in

    Had this on a KM device, went round and checked all print queues until i found one with stuck jobs, cleared the queue and it was fine, discovered that KM print drivers hadn't been installed on her PC, so every time she printed a certain PDF document, the copier would reboot, got her to send job to her colleague with correct KM drivers, and it printed, installed correct drivers and have had no more problems....
    Tip for the day; Treat every problem as your dog would.....If you cant eat it or f*ck it....then p*ss on it & walk away...

  4. #14
    Technician
    Join Date
    Jun 2011
    Posts
    48
    Rep Power
    0

    Re: MX-C300w keeps rebooting when network cable is plugged in

    Things that can cause this issue.

    NIC speed
    Print jobs
    POE
    IP conflicts
    Bad Network cable
    Bad Network port on customers switch
    Printing via outdated driver or incorrect driver


    Always have services you don't need on the copier disabled (pop3, DDNS etc) and always make sure you have the latest firm installed.

  5. #15
    Junior Member
    Join Date
    Oct 2017
    Location
    Sheffield
    Posts
    8
    Rep Power
    0

    Re: MX-C300w keeps rebooting when network cable is plugged in

    Remove any smtp settings.

  6. #16
    Technician
    Join Date
    Aug 2017
    Location
    Johannesburg,Gauteng
    Posts
    24
    Rep Power
    5

    Re: MX-C300w keeps rebooting when network cable is plugged in

    I seem to remember that was a firmware update for this problem check that the machine has the latest firmware.


    Sent from my iPad using Tapatalk

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here