Page 1 of 3 123 LastLast
Results 1 to 10 of 26
  1. #1
    Junior Member
    Join Date
    Apr 2019
    Location
    Paradise, CA
    Posts
    5
    Rep Power
    0

    Sharp MX-4141N Phantom Paper Jam

    Sharp MX-4141n. Everytime I use the ADF to make copies/scan/etc it will give a misfeed error code. Machine prompts to open the door and check for misfeeds, however nothing is ever there. If I simply just lift the door and close it, the error clears.....however it does it everytime. Any pointers on what may be causing this?

  2. #2
    Service Manager 1,000+ Posts
    Sharp MX-4141N Phantom Paper Jam

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    2,161
    Rep Power
    101

    Re: Sharp MX-4141N Phantom Paper Jam

    Quote Originally Posted by hanfordzucc View Post
    Sharp MX-4141n. Everytime I use the ADF to make copies/scan/etc it will give a misfeed error code. Machine prompts to open the door and check for misfeeds, however nothing is ever there. If I simply just lift the door and close it, the error clears.....however it does it everytime. Any pointers on what may be causing this?
    How many clicks on the MFP? How many scans though the document feeder? Have you cleaned sensors? When was the last time a DF kit was installed?

  3. #3
    Senior Tech 100+ Posts xring1958's Avatar
    Join Date
    Mar 2016
    Location
    Houston, Texas
    Posts
    166
    Rep Power
    18

    Re: Sharp MX-4141N Phantom Paper Jam

    Like copiertec said check your rollers & sensors they can be checked in Sim 2 if you are an end user you should call your tech, you can break a lot of expensive things not knowing how.

  4. #4
    Field Supervisor 500+ Posts
    Sharp MX-4141N Phantom Paper Jam


    Join Date
    Dec 2009
    Location
    Waukegan IL
    Posts
    956
    Rep Power
    57

    Re: Sharp MX-4141N Phantom Paper Jam

    Does it start to feed the paper in or does it say jam right when the start button is pushed?

  5. #5
    Service Manager 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,432
    Rep Power
    54

    Re: Sharp MX-4141N Phantom Paper Jam

    What is the jam code? If it is SPPD5 then check that sensor, it tends to hang up and will cause this situation. Have also had small bits of paper get into the SPPD3 sensor area and cause a similar problem.

    Good luck.

    Bil

  6. #6
    Senior Tech 100+ Posts
    Sharp MX-4141N Phantom Paper Jam

    moose55's Avatar
    Join Date
    Mar 2017
    Location
    Papillion, NE
    Posts
    143
    Rep Power
    16

    Re: Sharp MX-4141N Phantom Paper Jam

    Quote Originally Posted by bilyahn View Post
    What is the jam code? If it is SPPD5 then check that sensor, it tends to hang up and will cause this situation. Have also had small bits of paper get into the SPPD3 sensor area and cause a similar problem.

    Good luck.

    Bil
    Like bilyahn said...What is the jam code? Not a whole lot of info to go on? What have you done? What are the parts counts? It is extremely hard to diagnose over the internet without any pertinent info.......
    The Moose is loose!!

  7. #7
    Field Supervisor 500+ Posts ntbann's Avatar
    Join Date
    Jan 2012
    Location
    Port Huron
    Posts
    577
    Rep Power
    34

    Re: Sharp MX-4141N Phantom Paper Jam

    This series did have sensor problems but with no code no can help!

  8. #8
    Junior Member
    Join Date
    Apr 2019
    Location
    Paradise, CA
    Posts
    5
    Rep Power
    0

    Re: Sharp MX-4141N Phantom Paper Jam

    Ok, ive done a little more investigating. The feeder has 88K on it. Ive attached a picture of the error message Im getting, its not specifying a code. The way I am clearing the message is simply lifting the access door to the feeder and closing it and it clears it till I attempt to run more pages through it. It never actually misfeeds, doesn't matter if its one page or 50 ….all the pages go through. Just keep getting that error...
    Attached Images Attached Images

  9. #9
    Senior member of CRS 2,500+ Posts
    Sharp MX-4141N Phantom Paper Jam

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    3,367
    Rep Power
    102

    Re: Sharp MX-4141N Phantom Paper Jam

    Quote Originally Posted by hanfordzucc View Post
    Ok, ive done a little more investigating. The feeder has 88K on it. Ive attached a picture of the error message Im getting, its not specifying a code. The way I am clearing the message is simply lifting the access door to the feeder and closing it and it clears it till I attempt to run more pages through it. It never actually misfeeds, doesn't matter if its one page or 50 ….all the pages go through. Just keep getting that error...
    Check the error codes in the Sims - 22-6 print out (if I remember correctly).
    "You can't trust your eyes, if your mind is out of focus" --

  10. #10
    Senior Tech 100+ Posts
    Sharp MX-4141N Phantom Paper Jam


    Join Date
    Mar 2009
    Posts
    174
    Rep Power
    32

    Re: Sharp MX-4141N Phantom Paper Jam

    Quote Originally Posted by ZOOTECH View Post
    Check the error codes in the Sims - 22-6 print out (if I remember correctly).
    Agreed. Certainly enter the SIMULATION!!!!!!!!!!!!!!!!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here