The machine as about 80k BW 40k color print / copies
fax
inner finisher
It does Random jam from any tray with 2 letter tray and 1 legal .
The worst part of it (besides not doing it while I'm there) is that the jam report from sim 23-02 don’t register any jam at all. If I stuck a paper somewhere & "create" a jam myself, it's on the jam report, but not when the problem occur.
I spoke with sharp & on interesting thing they said is that ; If a "door open" is detected while printing they wont be any jam on the report. (I tested & it's true)
So what I did so far is: -new registration sensor & pre-registration
-both right door (desk) new sensors
-Image memory clear (sim 66-10)
-memory test
-installed a surge protector
-HDD read/write test
-just installed a new SD card today
Any suggestions would be appreciated.
Thanks
Bookmarks