Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 25
error when selecting LCC
we have a MX-LC13 connected to a MX-7500n...when we select the LCC , we get the message "check the connection between the main unit and the large capacity trays"... otherwise, the machine is normal... load test on the Lcc seems to work... any suggestions as to what is causing this?
-
Re: error when selecting LCC
I only see the LC18 or LC19 available for this model.
Sorry that was incorrect
Last edited by driving lots of miles; 06-27-2019 at 10:11 PM.
Reason: wrong model
-
Trusted Tech
50+ Posts
- Rep Power
- 14
Re: error when selecting LCC
Hi there check the sensor on the rb14 also check the the machine rb14 and Le 13 are all level as if they are not the same height the sensors will not activate.
Sent from my iPad using Tapatalk
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks