Same parts? AR-M455N and MX-M753N

[JLSam]

So, the 753's has a pressure roller that looks, feels, and has the same dimensions of a 455LH. Even the material looks and definitely feels the same. I'm super curious if anyone has tried using the 455 pressure roller on this faster 75ppm MFP.

Reasoning: The cost is significantly different...

I know SHARP likes to assign different part numbers for the EXACT same item. So, I'm curious if this is another one.

Any input, would be GREATLY appreciated. Thanks!

[guitar9199]

I looked at both from several sources. The 1341 roller only appears in the parts lists for 45 PPM boxes and slower. The 1840 shows under the 62-75 page per minute machines.

That's quite a difference in speed...so to play it safe I wouldn't chance it.

Maybe someone else will have more information than I do.... Good luck.

[bilyahn]

We use the AR620LH with the MXM753 series not the same roller but works somewhat better than the MX753LH roller. Dimensions are the same with both, the 620 roller has a firmer feel and lasts longer with less noise problems.

Good luck

Bil

[repn1999]

use the Sharp AR620LH as stated by bil. After market ones are crap. do yourself a favor and get oem for UH and LH. they will run way longer.