Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Nov 2010
    Location
    San Diego
    Posts
    135
    Rep Power
    29

    Sharp MX-B402 - How to access simulation mode

    Good morning,

    I replaced the black drum unit in the copier in response to the "DK Maintenance Kit" message. The instructions for accessing the simulation mode don't match keys on the control panel. How in doing a search on YouTube I found the following procedure;

    Press HOME button twice (One potato, two potato)
    Press HOME button twice (One potato, two potato)
    Press HOME button twice (faster)
    Press lower right corner (version number)
    A numeric keyboard will appear. Press "#", "*", "C" and "#".
    The simulation will appear.

    Any assistance (whether this is the correct method or if there another) would be deeply appreciated.

  2. #2
    Senior Tech 100+ Posts Jhonjon's Avatar
    Join Date
    Sep 2013
    Location
    Penang
    Posts
    205
    Rep Power
    24

    Re: Sharp MX-B402 - How to access simulation mode

    Quote Originally Posted by rdyjnkns View Post
    Good morning,

    I replaced the black drum unit in the copier in response to the "DK Maintenance Kit" message. The instructions for accessing the simulation mode don't match keys on the control panel. How in doing a search on YouTube I found the following procedure;

    Press HOME button twice (One potato, two potato)
    Press HOME button twice (One potato, two potato)
    Press HOME button twice (faster)
    Press lower right corner (version number)
    A numeric keyboard will appear. Press "#", "*", "C" and "#".
    The simulation will appear.

    Any assistance (whether this is the correct method or if there another) would be deeply appreciated.
    Press Copy mode on the screen. and then Press "#", "*", "C" and "#". look for 24 to reset the DK maint kit.

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Nov 2010
    Location
    San Diego
    Posts
    135
    Rep Power
    29

    Re: Sharp MX-B402 - How to access simulation mode

    Quote Originally Posted by Jhonjon View Post
    Press Copy mode on the screen. and then Press "#", "*", "C" and "#". look for 24 to reset the DK maint kit.
    Thank you.

  4. #4
    Senior member of CRS 2,500+ Posts
    Sharp MX-B402 - How to access simulation mode

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    3,366
    Rep Power
    102

    Re: Sharp MX-B402 - How to access simulation mode

    Quote Originally Posted by rdyjnkns View Post
    Thank you.
    I could be wrong (again), but I believe the sequence # * C *
    "You can't trust your eyes, if your mind is out of focus" --

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here