i was getting TA code. I cleared,but when the copier comes to ready i get
(Maintenance required.CodeIt will not clear.All the counters reset.
i was getting TA code. I cleared,but when the copier comes to ready i get
(Maintenance required.CodeIt will not clear.All the counters reset.
Copies were good so i reset Maintenance all.24-4 sim.When copier came back up,this was the exact messege.(Maintenance required.Code
So, no parts replaced?
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Not sure why that smiley face comes up.icons are off.
No
BUT.....
DID YOU REPLACE PARTS?
sometimes you have to clear individual parts before clearing the counters
and why would you clear counters if you hadn't replaced the parts? are you trying to: do a halfassed job? or do you feel the engineers that designed the unit and set maint part limits just are a bunch of fools?
Do you know what the TA code means? Most of the time you clear this code their are other items that need to be changed. Do you have count on you maintenance items such as, black and color drum rotations? black or color developer rotations? How about you TK1 and TK2 counts? Possibly even fuser counts? We need a little more help here...counts would be nice.
I dealt with this a while back when these first released. There was a bulletin about maintenance codes in regards to FK3 (web which these models do not have). If you have reset all codes it would seem this is the one you don't have access to in sim mode because it frankly doesn't exist.
Enter SIM Mode 55-1, select Switch Number 22, Data Number 6, and set to 0. Remember topress Execute before exiting the SIM Mode for the setting to become permanent.
This was also an issue on the new black and white MX-M machines as well which was fixed with a firmware upgrade.
So my recommendation is to upgrade firmware and then check and or change that soft switch.
Bookmarks