Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Sharp MX -5070

  1. #1
    Technician
    Join Date
    Jul 2018
    Location
    COATESVILLE
    Posts
    11
    Rep Power
    3

    Sharp MX -5070

    i was getting TA code. I cleared,but when the copier comes to ready i get
    (Maintenance required.CodeIt will not clear.All the counters reset.

  2. #2
    Service Manager 5,000+ Posts
    Sharp MX -5070

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    5,684
    Rep Power
    103

    Re: Sharp MX -5070

    Quote Originally Posted by TSS View Post
    i was getting TA code. I cleared,but when the copier comes to ready i get
    (Maintenance required.CodeIt will not clear.All the counters reset.
    what was the code #?
    did you replace the parts with the reset?

    did you follow service manual procedure?

    what did you EXACTLY reset?

    just to say you did it .. how do we know it was performed correctly?

  3. #3
    Technician
    Join Date
    Jul 2018
    Location
    COATESVILLE
    Posts
    11
    Rep Power
    3

    Re: Sharp MX -5070

    Copies were good so i reset Maintenance all.24-4 sim.When copier came back up,this was the exact messege.(Maintenance required.Code

  4. #4
    Service Manager 1,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    1,198
    Rep Power
    56

    Re: Sharp MX -5070

    So, no parts replaced?
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  5. #5
    Technician
    Join Date
    Jul 2018
    Location
    COATESVILLE
    Posts
    11
    Rep Power
    3

    Re: Sharp MX -5070

    Not sure why that smiley face comes up.icons are off.

  6. #6
    Technician
    Join Date
    Jul 2018
    Location
    COATESVILLE
    Posts
    11
    Rep Power
    3

    Re: Sharp MX -5070

    No

  7. #7
    Service Manager 5,000+ Posts
    Sharp MX -5070

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    5,684
    Rep Power
    103

    Re: Sharp MX -5070

    Quote Originally Posted by TSS View Post
    Copies were good so i reset Maintenance all.24-4 sim.When copier came back up,this was the exact messege.(Maintenance required.Code
    BUT.....

    DID YOU REPLACE PARTS?

    sometimes you have to clear individual parts before clearing the counters

    and why would you clear counters if you hadn't replaced the parts? are you trying to: do a halfassed job? or do you feel the engineers that designed the unit and set maint part limits just are a bunch of fools?

  8. #8
    Field Supervisor 500+ Posts
    Sharp MX -5070

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    504
    Rep Power
    16

    Re: Sharp MX -5070

    Quote Originally Posted by TSS View Post
    i was getting TA code. I cleared,but when the copier comes to ready i get
    (Maintenance required.CodeIt will not clear.All the counters reset.
    Do you know what the TA code means? Most of the time you clear this code their are other items that need to be changed. Do you have count on you maintenance items such as, black and color drum rotations? black or color developer rotations? How about you TK1 and TK2 counts? Possibly even fuser counts? We need a little more help here...counts would be nice.

  9. #9
    Junior Member
    Join Date
    Sep 2015
    Posts
    8
    Rep Power
    0

    Re: Sharp MX -5070

    I dealt with this a while back when these first released. There was a bulletin about maintenance codes in regards to FK3 (web which these models do not have). If you have reset all codes it would seem this is the one you don't have access to in sim mode because it frankly doesn't exist.

    Enter SIM Mode 55-1, select Switch Number 22, Data Number 6, and set to 0. Remember topress Execute before exiting the SIM Mode for the setting to become permanent.

    This was also an issue on the new black and white MX-M machines as well which was fixed with a firmware upgrade.


    So my recommendation is to upgrade firmware and then check and or change that soft switch.

  10. #10
    Trusted Tech 50+ Posts
    Sharp MX -5070

    havokprod's Avatar
    Join Date
    Oct 2012
    Location
    Los Angeles CA
    Posts
    66
    Rep Power
    15

    Re: Sharp MX -5070

    Quote Originally Posted by NYPRNLA View Post
    I dealt with this a while back when these first released. There was a bulletin about maintenance codes in regards to FK3 (web which these models do not have). If you have reset all codes it would seem this is the one you don't have access to in sim mode because it frankly doesn't exist.

    Enter SIM Mode 55-1, select Switch Number 22, Data Number 6, and set to 0. Remember topress Execute before exiting the SIM Mode for the setting to become permanent.

    This was also an issue on the new black and white MX-M machines as well which was fixed with a firmware upgrade.


    So my recommendation is to upgrade firmware and then check and or change that soft switch.

    Isn't it Sim 55-3 ?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here