Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25
  1. #21
    Senior member of CRS 2,500+ Posts
    MX-3640 unable to access network settings

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    3,165
    Rep Power
    90

    Re: MX-3640 unable to access network settings

    Can you get to the web page through a crossover cable with the laptop in the copier's current IP range?
    If so, you can make changes there, reboot and then change settings.
    "You can't trust your eyes, if your mind is out of focus" --

  2. #22
    Senior Tech 250+ Posts
    MX-3640 unable to access network settings

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    495
    Rep Power
    15

    Re: MX-3640 unable to access network settings

    Quote Originally Posted by ZOOTECH View Post
    Can you get to the web page through a crossover cable with the laptop in the copier's current IP range?
    If so, you can make changes there, reboot and then change settings.
    I haven't tried that, Zootech, but I will give it a try.

  3. #23
    Field Supervisor 500+ Posts
    MX-3640 unable to access network settings

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    525
    Rep Power
    34

    Re: MX-3640 unable to access network settings

    I doubt anyone who knew what they were doing set the machine to 192.168.1.1. Change your laptop IP to 192.168.1.2. Run a network cable between laptop and copier.

    Change IP address


    Download and run Advanced IP scanner

    Run the IP scanner on the range 192.168.1.1-254

    Scan the range, you should get two live replies, one from your laptop and one from the machine.

    Browse to the IP of the machine while still connected and make needed changes.

  4. #24
    Senior Tech 250+ Posts
    MX-3640 unable to access network settings

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    495
    Rep Power
    15

    Re: MX-3640 unable to access network settings

    Quote Originally Posted by mansart View Post
    I doubt anyone who knew what they were doing set the machine to 192.168.1.1. Change your laptop IP to 192.168.1.2. Run a network cable between laptop and copier.

    Change IP address


    Download and run Advanced IP scanner

    Run the IP scanner on the range 192.168.1.1-254

    Scan the range, you should get two live replies, one from your laptop and one from the machine.

    Browse to the IP of the machine while still connected and make needed changes.
    Thank you, Mansart. The actual IP the is set to the copier is 192.168.1.111, the network operates on a 192.168.0 octet, I was just using the 192.168.1.1 as an example. I will use what you have given me, I appreciate the help.

  5. #25
    Senior Tech 250+ Posts
    MX-3640 unable to access network settings

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    495
    Rep Power
    15

    Re: MX-3640 unable to access network settings

    Thank you for all your help! it turns out that I had made a mistake with the IP octet the prior visits. It was on a 192.168.1.10.111 as opposed to my 192.168.1.1.111. It took a second look at it today and discovered my over site. Once I made connection with the mfp I was able to get into the service web page and make the changes Spanky and Mansart had suggested.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here