Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Jun 2013
    Location
    Winfield Kansas
    Posts
    10
    Rep Power
    14

    Sharp Copier Sims

    Just looking at all the Sharp simulations and I use a lot of them for troubleshooting problems like sim 1-2, 2-2, 3-2, 7-1, along with the ones that clear the codes. Also I use 22-40 and 41 for the list of codes and errors. So what codes do you seem to use the most? Just a question for the input of others.

  2. #2
    Senior member of CRS 2,500+ Posts
    Sharp Copier Sims

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    3,168
    Rep Power
    91

    Re: Sharp Copier Sims

    Refer to the installation manual during setup, and after service/pm. I've been retired 3.5 years, but I remember that adjusting print/copy position, you would use the sims in the 50-sub range. For print/copy quality, use the 46-sub range.
    "You can't trust your eyes, if your mind is out of focus" --

  3. #3
    Field Supervisor 500+ Posts
    Sharp Copier Sims

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    504
    Rep Power
    16

    Re: Sharp Copier Sims

    Most often used 22-6, 24-1 and 64-1,5 if no calibration needed or error codes need to be reset.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here