Likes:
0
Dislikes:
0
-
Senior Tech
250+ Posts
- Rep Power
- 26
MX3060 User Codes and Airprint
Hope someone can help with this?
ive set up a MX3060 with user codes, just using the 5 digit user number to restrict unauthorised use, all very simple and all works fine until they come to use AirPrint from their phones. The phone finds the machine ok and when you click print you get a message appear on the phone asking for user name and password? As far as I know I haven’t set any user names up, I simply ticked the user number and entered a 5 digit code? If I turn user codes off, then AirPrint works fine, but switch back on and it asks for user name and password?. I’m confused with this
-
Re: MX3060 User Codes and Airprint
Airprint does not support the 5 digit pin code
With accounting turned on using only pin code.....when using Airprint and asked for user and pass ...... use admin admin
If they want to track prints from phone you will have to set up user names and passwords
See the following
Sharp Airprint
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks