Thanks:
0
Likes:
0
Dislikes:
0
-
Junior Member
- Rep Power
- 0
SHARP AR-6020 Error E7,10 - Black Copy
AR-6020 seems to be a troublesome machine, series of errors now and then.
E7,10 Error shows, check and cleaned everything, error persisted, then after SIM-14, Errors clears, machine takes forever to be ready on its own, but if forced to be ready, Machine copy complete BLACK.
Anyone experience this before? I need help. What can I do?
Last edited by noobtech; 01-15-2020 at 04:38 PM.
Reason: missed important detail
-
Re: SHARP AR-6020 Error E7,10 - Black Copy
Description: Shading problems (black correction). The scan level of the CCD black is abnormal during shading.
Causes: Incorrect connection of the flat cable of the CCD unit. Fault of the CCD unit. Fault of the MCB PWB.
Solution: Check the flat cable connection of the CCD unit. Check the CCD unit
-
Re: SHARP AR-6020 Error E7,10 - Black Copy
all black copy, did you also print from pc or internal test?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks