Results 1 to 9 of 9
  1. #1
    Junior Member
    Join Date
    Sep 2013
    Posts
    6
    Rep Power
    0

    Sharp mx 2010u new cont execute sim 46-74

    I just setup a brand new sharp copier mx 2010u every this is working fine except that the colour density is very light and wanted to perform engine auto adjustment using the sim 46-74 everything went on will and the colour patch is printed but when i placed it on the document glass and execute it execute alright but then ask to place the printed test patch and execute, again.. cant get to succeed..
    any idea on how to correct this pls

  2. #2
    Field Supervisor 500+ Posts
    Sharp mx 2010u  new cont execute sim 46-74

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    546
    Rep Power
    37

    Re: Sharp mx 2010u new cont execute sim 46-74

    I hate to ask but have you tried rotating the test print 180 degrees on the glass?

    Machine will give that message if you have wrong orientation of test print

  3. #3
    Junior Member
    Join Date
    Sep 2013
    Posts
    6
    Rep Power
    0

    Re: Sharp mx 2010u new cont execute sim 46-74

    yes please, i have tried all kinds or angles/ rotated in all angles and even retried the procedure using A4, A3 and letter papers and rotating them in all angles but it is still not reading the date.
    Quote Originally Posted by mansart View Post
    I hate to ask but have you tried rotating the test print 180 degrees on the glass?

    Machine will give that message if you have wrong orientation of test print

  4. #4
    Service Manager 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,229
    Rep Power
    41

    Re: Sharp mx 2010u new cont execute sim 46-74

    Try doing the auto calibration in system settings first then go back to the simulation.
    I would also try these simulations in the following order
    44-27
    44-2
    44-6
    44-26
    Then do 46-74 or you can even do 46-24 and 67-24 (copy and print calibrations) separately
    These are not really required for the most part anymore but if I am having weird issues I like to do every one of them. But try the customer autocalibration first to see what happens.

    Good luck

    Bil

  5. #5
    Junior Member
    Join Date
    Sep 2013
    Posts
    6
    Rep Power
    0

    Re: Sharp mx 2010u new cont execute sim 46-74

    all procedure followed everything seceeded and the pattern is printed but still when placed on the document scanner it is still asking to place the printed patch.. so wired that i dont even know where to look

    Quote Originally Posted by bilyahn View Post
    Try doing the auto calibration in system settings first then go back to the simulation.
    I would also try these simulations in the following order
    44-27
    44-2
    44-6
    44-26
    Then do 46-74 or you can even do 46-24 and 67-24 (copy and print calibrations) separately
    These are not really required for the most part anymore but if I am having weird issues I like to do every one of them. But try the customer autocalibration first to see what happens.

    Good luck

    Bil

  6. #6
    Technician Prints Charming's Avatar
    Join Date
    Aug 2019
    Location
    In the crawlspace
    Posts
    15
    Rep Power
    3

    Re: Sharp mx 2010u new cont execute sim 46-74

    The only thing left if you've done the steps mentioned (and you're sure the patch density is pretty good), is the Black Mag adjust and OC adjust in sim 50-28. Sounds like the calibration patches are not being read correctly. Your scan magnification is probably out of spec. Have seen this on many Gemini and Aries devices. Black Mag and OC adjust will fix both the scan distance and the size of the patches on the sheet. If one or both are out, you get the message you've mentioned.
    Also, please advise what the firmware version is. This is a model originally released in about 2015, and you've said it's brand new. Make sure you update the firmware!
    Run Black Mag Adjust, then try the normal 46-74 again.

  7. #7
    Junior Member
    Join Date
    Sep 2013
    Posts
    6
    Rep Power
    0

    Re: Sharp mx 2010u new cont execute sim 46-74

    please i have done above and still the same message, kindly show me how to check the firmware version so i can get the firmware to update and try that option too
    Many thanks

  8. #8
    Junior Member
    Join Date
    Jul 2014
    Location
    carlsbad,nm
    Posts
    3
    Rep Power
    0

    Re: Sharp mx 2010u new cont execute sim 46-74

    document is up to the top left corner of glass?

  9. #9
    Senior Tech 250+ Posts spanky's Avatar
    Join Date
    Sep 2012
    Location
    Md
    Posts
    315
    Rep Power
    21

    Re: Sharp mx 2010u new cont execute sim 46-74

    Are the calibration pages that print out of good quality, are the color boxes solid?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here