Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Technician
    Join Date
    Dec 2014
    Posts
    43
    Rep Power
    14

    DSPF 2 to 2 lead edge is way off side 1 only

    Have an mxm365 with the DSPF. On single-sided copies through the feeder registration is dead on. When doing 2 to 2 copying, side 1 is way off. There is a huge trail edge void. Side 2 is dead on. Dspf has just been rebuilt and cleaned. Any ideas? It was disassembled and blown out so no paper clips or staples.20200401_093236.jpg20200401_093937.jpg

  2. #2
    Master Of The Obvious 10,000+ Posts
    DSPF 2 to 2 lead edge is way off side 1 only

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    18,244
    Rep Power
    313

    Re: DSPF 2 to 2 lead edge is way off side 1 only

    Does it have a simulation 50-6? If it were me I think I'd take a little peek in the manual. Who knows? There might be something useful there. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician
    Join Date
    Dec 2014
    Posts
    43
    Rep Power
    14

    Re: DSPF 2 to 2 lead edge is way off side 1 only

    Of course it does and I have "peeked" in it. Ty Mr. Helper for the suggestion. Now it is intermittent.

  4. #4
    Master Of The Obvious 10,000+ Posts
    DSPF 2 to 2 lead edge is way off side 1 only

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    18,244
    Rep Power
    313

    Re: DSPF 2 to 2 lead edge is way off side 1 only

    So, side #2 remains registered properly while side #1 intermittently does not register properly?

    Sorry I don't have any ideas about that. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Technician
    Join Date
    Dec 2014
    Posts
    43
    Rep Power
    14

    Re: DSPF 2 to 2 lead edge is way off side 1 only

    Yes sir, that's correct. Very strange. Side 2 is ALWAYS dead on. Now side 1 is intermittent whereas earlier it was everytime. Clutch maybe?

  6. #6
    Master Of The Obvious 10,000+ Posts
    DSPF 2 to 2 lead edge is way off side 1 only

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    18,244
    Rep Power
    313

    Re: DSPF 2 to 2 lead edge is way off side 1 only

    This is a single pass document feeder. The original is being scanned simultaneously on both sides at the same time. So how can the front of the page be late, while the back of that same page is on time? The original would have to be in two places at the same time. I don't have any kind of explanation for that. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  7. #7
    Technician
    Join Date
    Dec 2014
    Posts
    43
    Rep Power
    14

    Re: DSPF 2 to 2 lead edge is way off side 1 only

    Thank you, EXACTLY my thought. I did not do multiple copies so i do not know if it was a copier registration issue. Doing 3 each time now to see if all 3 are side 1 reg off

  8. #8
    Master Of The Obvious 10,000+ Posts
    DSPF 2 to 2 lead edge is way off side 1 only

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    18,244
    Rep Power
    313

    Re: DSPF 2 to 2 lead edge is way off side 1 only

    Now COPY and PRINT registration is done one side at a time, so yes, you can have a clutch affecting PRINT image registration. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  9. #9
    Trusted Tech 50+ Posts
    DSPF 2 to 2 lead edge is way off side 1 only


    Join Date
    Oct 2016
    Location
    Grand Island, NE
    Posts
    81
    Rep Power
    8

    Re: DSPF 2 to 2 lead edge is way off side 1 only

    Just do a Sim 50-28 for the SPF. This should take care of it. If it doesn't, I would be looking at a CID.

  10. #10
    Senior Tech 100+ Posts
    Join Date
    Mar 2014
    Posts
    119
    Rep Power
    15

    Re: DSPF 2 to 2 lead edge is way off side 1 only

    You can make a 2 to 2 using the glass to help see if it is a DSPF or engine problem.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here