Originally Posted by
Prints Charming
I agree.
Change the auto exposure settings or color mode to 'Full Color' instead of Auto. This will help.
However, have you checked this is not a DSPF Calibration problem? Have you scanned a 64-05 test print on both sides and compared the results with non-fluro marked pages? You may have a DSPF calibration issue that needs adjusting.
You'll need the SIT Chart to calibrate the CCD in sim 63: (UKOG-0356FCZZ).
Definitely try different AE modes first, but going by your sample, you have a big difference in calibration values on both CCD units.
Bookmarks