MX4071 PHOENIX II SERIES E7-90 codes

[kdr363]

Hello, KDR363

I am wonderring if there was a resolution to this problem.

No resolve. However, I've had 2 problem machines, that coded about once a week, hasn't coded in months, no idea why. Checking my records, my fleet overall has decreased in the number of E7-90 codes. Firmware corrections that Sharp doesn't mention? IDK

[Craigcul]

Hi I have seen this error caused by power failure it seems to cause errors in the hard drive it then start throwing up this error code

But I have seen that suddenly sharp changed to a new manufacture of the power supply, I wander.


Sent from my iPad using Tapatalk

[kdr363]

Firmware is coming for this problem. But you didn't hear it from me.

[mloudy]

Firmware is coming for this problem. But you didn't hear it from me.

Released yesterday. For this series and the mono.

[OlliK1969]

Hi

firmware 05.00.Z2 is available

[kdr363]

The firmware update has been 100% effective on the dozen or so machines having this problem, which is great, but frustrating at the same time as to why it took almost 2 years of jumping through hoops to finally get a resolve.

[boutn]

Any chance this is coming for the MX4070N/V also?

[kdr363]

Any chance this is coming for the MX4070N/V also?

I can remember the earlier versions having E7-80 and 90 errors. They too were corrected with firmware a few years ago.

[boutn]

I can remember the earlier versions having E7-80 and 90 errors. They too were corrected with firmware a few years ago.

I guess thats a no/i dont know?