Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Junior Member
    Join Date
    May 2020
    Location
    Brussels
    Posts
    5
    Rep Power
    0

    MX-C300W reboot on SMTP test

    Hi,
    I'm trying to setup this MXC300W in my home network, so pretty simple environment.
    Configuring the SMTP settings to get scan-to-mail working.
    Whenever I run the "Test" in the SMTP settings, the MFP reboots.
    There are no messages about connections failures or anything... it just reboots after about 5 sec I click the button.

    I've tried this with the MFP connected to Wifi and to Wired (different IP addresses), but same thing.
    I've tried with different SMTP settings from ISP and even gmail, with and without authentication... same thing.

    When I remove the DNS config and run the SMTP test, at least I get a message that he cannot resolve the host name. Which is logic, but at least it shows the routine is starting.

    Current FW is 02.07.E1

    Any suggestion?

    Thanks

  2. #2
    Junior Member
    Join Date
    May 2020
    Location
    Brussels
    Posts
    5
    Rep Power
    0

    Re: MX-C300W reboot on SMTP test

    By the way...
    Same thing happens (reboot) when I do the "scan-to-mail" operation from the operator panel.

  3. #3
    Field Supervisor 500+ Posts
    MX-C300W reboot on SMTP test

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    843
    Rep Power
    54

    Re: MX-C300W reboot on SMTP test

    I have not seen your specific problem, however, in the past, I have seen some strange reboot problems when RARP is enabled.

    This is an obsolete address resolution protocol. I'm not even sure if it is available on the C300.

    If it is it is in the Network>>protocol or services (I believe). Make sure that is turned off

  4. #4
    Junior Member
    Join Date
    May 2020
    Location
    Brussels
    Posts
    5
    Rep Power
    0

    Re: MX-C300W reboot on SMTP test

    Quote Originally Posted by mansart View Post
    I have not seen your specific problem, however, in the past, I have seen some strange reboot problems when RARP is enabled.

    This is an obsolete address resolution protocol. I'm not even sure if it is available on the C300.

    If it is it is in the Network>>protocol or services (I believe). Make sure that is turned off
    Thanks for your feedback mansart.
    Unfortunately I could nod find any references to RARP in any of the config panels.
    Issue happens every time any mail send function is tried (also noticed it happening with the log status/alert messaging feature via mail)

    I don't know how old my FW release is, neither do I know what has been fixed since then, but to make sure I'm not fighting with dragon that already has been slayed, I was thinking of doing a FW upgrade.
    Current FW is 02.07.E1
    I have no indication that this will fix anything of my problem, but sounds like the logical thing to do.
    Now I noticed I cannot find any place to download the latest FW.
    This is a private use printer for my personal home use, so nothing like a professional service coverage on it or anything.
    I bought this MFP second hand, since I was sick and tired of the consumer style printers that never work when you need them to.
    Can anyone help me with getting the latest FW for this device? (Sharp MX-C300W)

    Thanks for helping out!

  5. #5
    Junior Member
    Join Date
    May 2020
    Location
    Brussels
    Posts
    5
    Rep Power
    0

    Re: MX-C300W reboot on SMTP test

    So, just a little update (no solution)

    meanwhile FW was upgraded to latest version
    But any SMTP test or function would have the MFP reboot.
    - Test SMTP button
    - Send Information/Alert messaging report
    - Scan-to-mail

    Issue seems not ralted to scanning as all other scanning functions work:
    - copy
    - scan-to-FTP
    - scan-to-desktop

    That is enough for me to work... only frustrating this one fails

  6. #6
    Technician
    Join Date
    Jul 2019
    Posts
    27
    Rep Power
    10

    Re: MX-C300W reboot on SMTP test

    Have you set up all the network settings in the web browser of the machine
    IP address
    Subnet
    Gateway
    DNS if I had problems I would use 8.8.8.8 for this
    Your SMTP setting to send email


    Sent from my iPhone using Tapatalk

  7. #7
    Junior Member
    Join Date
    May 2020
    Location
    Brussels
    Posts
    5
    Rep Power
    0

    Re: MX-C300W reboot on SMTP test

    Quote Originally Posted by bmwmick View Post
    Have you set up all the network settings in the web browser of the machine
    IP address
    Subnet
    Gateway
    DNS if I had problems I would use 8.8.8.8 for this
    Your SMTP setting to send email


    Sent from my iPhone using Tapatalk
    I think it is setup as it should.
    I've tried with DHCP enabled => getting IP, gateway and subnet mask from network
    Now I've set fixed IP.
    For DNS I've used different setups as DNS servers (ISP provided, use the Default gateway as DNS, use the google 8.8.8.8)... unfortunately there seems to be no test function on those settings on the MFP.
    Also for the SMTP settings I've tried with a gmail setup (smtp.gmail.com, port 587 & gmail credentials) or using my ISP SMTP setup.
    I have a NAS on the same network and same setup who's able to sent notification messages.
    It all results in the same => as soon as I trigger any mail function from the MFP, the device reboots (no error message or whatsoever).

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here