Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: Sharp AR M355N

  1. #1
    Field Supervisor 500+ Posts tcypy1961's Avatar
    Join Date
    Feb 2009
    Location
    Pensacola, FL
    Posts
    735
    Rep Power
    33

    Sharp AR M355N

    After replacing developer; dev seal, drum and blade copies improved yet leaving lines/streaks. Don't see anything to indicate coming from drum. Possible charge grid???
    Sending 3 samples streaks on 2 of the 3. The before copy and something I copied so that lines/streaks could be seen. Best I can tell copier was doing this before my service. Customer has not been using this copier for several years. There are 2 other copiers being used mainly for printing; customer feels the need to have this copier available for copies; says they are getting busy. Glad somebody is.
    Thanks!!!IMG_0468 GC Adv Ins.JPGIMG_0470 GC Adv Ins.JPGIMG_0471 GC Adv Ins.JPG
    Attached Images Attached Images

  2. #2
    Master Of The Obvious 10,000+ Posts
    Sharp AR M355N

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,792
    Rep Power
    380

    Re: Sharp AR M355N

    Did you clean the paper dust collector on the registration assembly? If it's been dumping toner, there will be a lot in the paper dust collector. It may diminish if the current developer isn't dumping. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior Tech 250+ Posts JLSam's Avatar
    Join Date
    Jun 2015
    Location
    Los Angeles
    Posts
    397
    Rep Power
    31

    Re: Sharp AR M355N

    $5.00 says you didn't replace the sub blade, despite being a routine maintenance item. Sharp AR M355N

    Replace the sub blade bro, toner is leaking.

    Good luck!

    Sent from my GM1917 using Tapatalk

  4. #4
    Technician
    Join Date
    Mar 2015
    Location
    crofton, MD
    Posts
    10
    Rep Power
    14

    Re: Sharp AR M355N

    First, Always clean the charge grid & sawtooth. Second, Your problem looks like the teflon is coming off the upper fuser roller.

  5. #5
    Technician
    Join Date
    Dec 2012
    Location
    Viola, AR
    Posts
    30
    Rep Power
    18

    Re: Sharp AR M355N

    agree with OEM1 Fuser roller

  6. #6
    Senior Tech 250+ Posts JLSam's Avatar
    Join Date
    Jun 2015
    Location
    Los Angeles
    Posts
    397
    Rep Power
    31

    Re: Sharp AR M355N

    Quote Originally Posted by OEM1 View Post
    First, Always clean the charge grid & sawtooth. Second, Your problem looks like the teflon is coming off the upper fuser roller.
    I agree that it's what it looks like, but I'm confident it's the subblade. Any competent tech would of seen the fuser ghosting due to the Teflon being worn.

    It's the sub blade bro. Sharp AR M355N

    Sent from my GM1917 using Tapatalk

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here