MX-FN27N Connection Harness

[xring1958]

We want to move one of the older FN-27 finishers to a newer machine that has the new connection harness I don't see a harness listed in parts guide has anyone ordered one of these and have the Part Number Thanks

[Phil B.]

We want to move one of the older FN-27 finishers to a newer machine that has the new connection harness I don't see a harness listed in parts guide has anyone ordered one of these and have the Part Number Thanks

depends on which newer model you are trying to hook it up to

[xring1958]

depends on which newer model you are trying to hook it up to

I want to connect to a MX-5070V they changed the harness connections a few years ago.

[Phil B.]

I want to connect to a MX-5070V they changed the harness connections a few years ago.

then it probably won't work.. different harness .. different board ...

different schematics for pinout

check pinout for each...

IMHO buy a different finisher .. the correct one to match the copier.

[xring1958]

then it probably won't work.. different harness .. different board ...

different schematics for pinout

check pinout for each...

IMHO buy a different finisher .. the correct one to match the copier.

We actually did it once before but we had a donor/ parts finisher so we didn't need the Part #

[branjake]

Look at MFP-TB-1717R2 Part #DKIT-0474DSZZ

[xring1958]

Look at MFP-TB-1717R2 Part #DKIT-0474DSZZ

Thanks a bunch. They aren't giving them away!

[xring1958]

Look at MFP-TB-1717R2 Part #DKIT-0474DSZZ

Thanks again we got part in and it worked. I was expecting a cable not a adapter board but all is well.

[branjake]

Thanks again we got part in and it worked. I was expecting a cable not a adapter board but all is well.

No problem, we have used those boards multiple times so far.

[Squiggy]

will these work on the 1 series also?