Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts xring1958's Avatar
    Join Date
    Mar 2016
    Location
    Houston, Texas
    Posts
    166
    Rep Power
    18

    MX-M3070 Weak solids.

    We have a MX-M3070 with about 120K copies on it we recently replaced the Drum and later the Developer. Tech noticed Mag roller was very discolored with a dark Grey coating, Many years ago we had a similar issue with the Panasonic DP-2500 a mono component machine. We found that if we cleaned the roller with solvent it would resolve the density issue. This is the first time we have seen a Dual component developer machine. We are planning on replacing the unit but was wondering if any of you have seen this issue.

    Thanks

  2. #2
    Service Manager 1,000+ Posts
    MX-M3070 Weak solids.

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    2,161
    Rep Power
    101

    Re: MX-M3070 Weak solids.

    If it is not one of the updated developing units, do not waste your time, just order the updated one. Many issues and updated units.

  3. #3
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: MX-M3070 Weak solids.

    Trying running laser power adjustment after the normal calibrations, 61-11


    Failing to plan is planning to fail!!!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here