MX 2610 prints only with Windows

[Phil B.]

Thank you for your reply

I'm under MAC OS 10.14 (Mojave) and not Windows 10.

Do you know which drive I have to use ?

Thank you again.

you said you are printing to WIN10 & MAC which is it?

YOU HAVE BEEN TOLD OVER N OVER WITHOUT THE PRINT KIT YOU CANNOT PRINT IN POSTSCRIPT WHICH THE MACS -=REQUIRE=- POSTSCRIPT..

CLEARLY YOU SEEM TO BE OVER YOUR PAYGRADE ON THIS ISSUE....

only now do you tell us it's a MX2610M ( which doesn't show on the sharp website ) you also stated this in your original post

"I have a MX-2610 printer. (notice no N nor M mentioned)

This one is only printing with Windows but not wiht Mac OS (Mojave).

I installed drivers from Sharp and installed the printer on the iMac."

seems like you don't know what you have or how to configure it..

HIRE A TECH

[spanky]

Sharp has a print driver for the MX-2610N that supports Mac OS 10.15 version 2.1.1.1

Would that work for you?

[xring1958]

Yes using a generic driver you can print in black you can go into sim 22-10 t see if yours might have it. When you are installing the PS driver make sure you choose the IP address don't let the mac find it . Here is my cheat sheet

1. Go to Sharp USA Downloads page
2. Select correct MFP and download OS PACKAGE
3. Download File
4. Click downloaded file
5. Open file folder
6. Run DMG File
7. Open Mac OSX folder
8. Open correct version ( check apple logo for version)
9. Open box Icon
10. Continue—Continue – Agree—Install
11. Needs name & password then ( install Software)
12. Installation complete big check Mark
13. Open system Preferences Gear on bottom of screen
14. Or Apple Icon select system preferences
15. Open Printers & scanners Menu
16. Click Plus to add printer Ignore any printer already visible
17. Click add printer or scanner
18. Go to IP tab ( top of window (round))
19. Add IP address in address box
20. Make sure to use LPD
21. Should auto find
22. You can change printer name from IP address to Name and model
23. Click ADD
24. Configure options Manually
25. If ID Codes are used do File print then select job handling in drop down box at center line