Results 1 to 8 of 8
  1. #1
    Service Manager 1,000+ Posts
    MX 3140N unable to login as admin/service or list prints

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    2,161
    Rep Power
    101

    MX 3140N unable to login as admin/service or list prints

    I have a strange issue with a MX-3140N, no DSK. 1.) I am unable to access the settings page on the control panel, it just goes into, "please wait' and nothing happens. 2.) I can't login as admin via the panel or webpage and service_login page A) I have done the dipswitch to access password and service reset, they complete but i am still unable to login even with the password reset. Also, I am unable to print any pages from service mode, ie, sim 22-6, 64-1,5, etc..nothing happens. All firmware, emaunual, watermark reinstalled and up to date. Any ideas? MFPc pwb or HDD?
    Last edited by copiertec; 09-10-2020 at 11:18 PM.

  2. #2
    Senior Tech 250+ Posts driving lots of miles's Avatar
    Join Date
    Jun 2016
    Location
    Kansas
    Posts
    362
    Rep Power
    22

    Re: MX 3140N unable to login as admin/service or list prints

    I had this happen on a similar machine and it was the SD card. Worked fine after replacing it.

  3. #3
    Service Manager 1,000+ Posts
    MX 3140N unable to login as admin/service or list prints

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    2,161
    Rep Power
    101

    Re: MX 3140N unable to login as admin/service or list prints

    Quote Originally Posted by driving lots of miles View Post
    I had this happen on a similar machine and it was the SD card. Worked fine after replacing it.
    I forgot to mention, I replaced the sd card, but I cloned it off of that one so that could be an issue. I will try cloning from another sd card.

  4. #4
    Junior Member
    Join Date
    May 2019
    Location
    Forest Hill, Victoria
    Posts
    5
    Rep Power
    0

    Re: MX 3140N unable to login as admin/service or list prints

    Quote Originally Posted by copiertec View Post
    I have a strange issue with a MX-3140N, no DSK. 1.) I am unable to access the settings page on the control panel, it just goes into, "please wait' and nothing happens. 2.) I can't login as admin via the panel or webpage and service_login page A) I have done the dipswitch to access password and service reset, they complete but i am still unable to login even with the password reset. Also, I am unable to print any pages from service mode, ie, sim 22-6, 64-1,5, etc..nothing happens. All firmware, emaunual, watermark reinstalled and up to date. Any ideas? MFPc pwb or HDD?
    My experience was HDD faulty, it was the same behavior as you described and access to address book become blank, still able to print and web interface access.

    Try a clean clone SD first but if no help would be HDD.

  5. #5
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: MX 3140N unable to login as admin/service or list prints

    FYI for Sharps that are UNABLE to print at all, you can extract pretty much all the good reports (22-6, job log) to a USB drive using SIM 56. It will give you error codes and an idea of what the issues are.


    Failing to plan is planning to fail!!!

  6. #6
    Senior Tech 250+ Posts
    Join Date
    Jun 2016
    Posts
    456
    Rep Power
    23

    Re: MX 3140N unable to login as admin/service or list prints

    replace HDD

  7. #7
    Service Manager 1,000+ Posts
    MX 3140N unable to login as admin/service or list prints

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    2,161
    Rep Power
    101

    Re: MX 3140N unable to login as admin/service or list prints

    I am hoping to make it back oout to the client this week. I have a new sd and hdd, I will keep you posted.

  8. #8
    Service Manager 1,000+ Posts
    MX 3140N unable to login as admin/service or list prints

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    2,161
    Rep Power
    101

    Re: MX 3140N unable to login as admin/service or list prints

    Thanks again for the insight, it was the HDD, replaced it and all is good. I could not print out any 64 and 22 sims,the client said color was off, boy was it. A few MK kits and a calibration colors back on track.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here