Results 1 to 5 of 5

Thread: Sharp MX-3100N

  1. #1
    Junior Member
    Join Date
    Sep 2020
    Location
    Xalapa-enriquez
    Posts
    2
    Rep Power
    0

    Sharp MX-3100N

    Hi! i'm having issues whith a sharp mx-3100N. it dogears the sheets when we send any print job. also the sheet trays have something wrong as the suddenly stopped detecting that they were loaded; and prompted me to "push the tray until it latches" this is a basic machine with only two trays and a fax module without any other add ons.
    if you need pictures i'd gladly send them tomorrow when i get back to my job
    ( we use it on a stationery shop in a little town in mexico and any big city is a 6 hour drive away

  2. #2
    Service Manager 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,432
    Rep Power
    54

    Re: Sharp MX-3100N

    For the paper tray I would check the sensors. If you have another feed assembly just swap it out. Dog ears can be almost anything. Check the paper path for burrs or obstructions.

    Good luck

    Bil

  3. #3
    Junior Member
    Join Date
    Sep 2020
    Location
    Xalapa-enriquez
    Posts
    2
    Rep Power
    0

    Re: Sharp MX-3100N

    I switched the sensors around and now it sometimes detects them properly and sometimes not so i guess this is an improvement. ill try to take some pics of the fuser, that is where the sheets always jam

  4. #4
    Service Manager 1,000+ Posts
    Sharp MX-3100N

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    2,161
    Rep Power
    101

    Re: Sharp MX-3100N

    Are the fuser rollers in good shape? No toner build up and not past pm cycle. The pick guides will need more spring pressure, either replace the springs with new ones or take the current ones and shorten them a loop.

  5. #5
    Senior Tech 250+ Posts
    Join Date
    Jul 2014
    Location
    Birmingham
    Posts
    279
    Rep Power
    23

    Re: Sharp MX-3100N

    Do you hear something like thumping noise from fuser? If yes then replace upper heat roller.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here