Thanks: 
Likes: Hello,
with the extended lan card there is no default gateway. is it possible to change this so there is a default gateway?
regards.
Dislikes: 0
Hello,
with the extended lan card there is no default gateway. is it possible to change this so there is a default gateway?
regards.
No default Gateway is possible on the extended LAN.
Some other restrictions on the extended LAN are No PC Scan (TWAIN), No WSD and the Job Log cannot show differences in source network.
Just out of curiosity....
What is the "extended lan" option?
I'm in the USA market and not familiar with this option. Is its purpose to put a machine on two separate networks?
Yes, there are options to install a USB-Network dongle to the rear USB Port and once enabled you'll see 2 Network Menus in system settings.Originally Posted by mansart
Have a look at any current model printer brochure to see the details.
No such option in the USA market
Sent from my iPhone using Tapatalk
Hi
USB3.0 Gigabit Ethernet Netzwerkadapter“ (TL-UE300)
Only for Griffin2,Phoenix2+NeoIT2
best regards
It happens so that I have a TL-UE300 adapter so I've decided to give it a try with Sharp MX-6071.
I've plugged it in to the back USB port and nothing. No additional network menu. Rebooted the machine, still nothing.
Is there something a Sharp dealer will have to unlock first, before it starts working? Or am I missing some configuration steps?
Thanks!
See sim 26-33 in the MX-6071 service manual
Correct.
Extended LAN must be enabled first.
Once done, you will see a new Extended LAN network option within Network Settings menu where you can configure the second network.
Under Security Settings, there's also a Port Control option for the second network as well.
A great feature of the Extended LAN is that you now can have 3 connections to the MFD instead of just 2.....Wired, Wireless Access Point and Extended LAN.
OK, so time to mail my sharp dealer. Thank you both!
Reply With Quote
Bookmarks