Page 10 of 11 FirstFirst 1234567891011 LastLast
Results 91 to 100 of 105
  1. #91
    Service Manager 10,000+ Posts
    MX-3110N Faded Prints, Copies Good

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    10,991
    Rep Power
    262

    Re: MX-3110N Faded Prints, Copies Good

    Quote Originally Posted by slimslob View Post
    Billy, I think we are dealing with another Canadian liberal.
    YES HE IS FROM canada ... tech of 2-10yrs ... hell I've got screwdrivers older than he's been a tech..

    129post 0 rep points bet he is a SUPER STAR in the field .. NOT!

    iggy the jackass.

  2. #92
    Technician
    Join Date
    Aug 2019
    Location
    Canada
    Posts
    37
    Rep Power
    3

    Re: MX-3110N Faded Prints, Copies Good

    Quote Originally Posted by Phil B. View Post
    another thing .. OP wasn't a tech..

    HELPS TO READ.
    The OP already had the belt removed. That is one screw to remove. Would have taken an additional 5 seconds to clean the sensors. I don't see the problem here. I have had customers clean those before.

    This is also a particularly smart/persistent end-user. Demonstrated by his willingness to replace the SD card, do emergency stops, run unnecessary sim codes, etc. When you're blessed with a smart enduser, don't waste their patience by making them run in circles.

    I think my point that this thread is unnecessarily hostile, stands. I know I haven't helped much in that regard. Still, I did read the entire thread before posting, and I've provided valuable advice that had some archival merit, before it got buried by this comical circle-jerk. You're patting yourselves on the back but ignoring the fact you failed to solve the problem.

    Phil B: a great percentage of your posts are rude and abusive with zero provocation. I figured you had thick enough skin to handle being called a noob. Not sure what a red card is but three of them seems excessive.

  3. #93
    Service Manager 1,000+ Posts
    MX-3110N Faded Prints, Copies Good

    BillyCarpenter's Avatar
    Join Date
    Aug 2020
    Location
    Long Beach, Mississippi
    Posts
    2,466
    Rep Power
    87

    Re: MX-3110N Faded Prints, Copies Good

    Quote Originally Posted by doyvid View Post
    The OP already had the belt removed. That is one screw to remove. Would have taken an additional 5 seconds to clean the sensors. I don't see the problem here. I have had customers clean those before.

    This is also a particularly smart/persistent end-user. Demonstrated by his willingness to replace the SD card, do emergency stops, run unnecessary sim codes, etc. When you're blessed with a smart enduser, don't waste their patience by making them run in circles.

    I think my point that this thread is unnecessarily hostile, stands. I know I haven't helped much in that regard. Still, I did read the entire thread before posting, and I've provided valuable advice that had some archival merit, before it got buried by this comical circle-jerk. You're patting yourselves on the back but ignoring the fact you failed to solve the problem.

    Phil B: a great percentage of your posts are rude and abusive with zero provocation. I figured you had thick enough skin to handle being called a noob. Not sure what a red card is but three of them seems excessive.
    Congrats, you know how do clean some sensors. Wouldn't have helped this particular problem, but I get it, you know how to clean some sensors. I don't know why you're so busy patting yourself on the back when your "advice" would have done NOTHING to fix the problem. I'm confused.....

    The actual fix was to replace the MFP board. Nothing to do with cleaning any sensors.

  4. #94
    Service Manager 10,000+ Posts
    MX-3110N Faded Prints, Copies Good

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    10,991
    Rep Power
    262

    Re: MX-3110N Faded Prints, Copies Good

    Quote Originally Posted by doyvid View Post
    The OP already had the belt removed. That is one screw to remove. Would have taken an additional 5 seconds to clean the sensors. I don't see the problem here. I have had customers clean those before.

    This is also a particularly smart/persistent end-user. Demonstrated by his willingness to replace the SD card, do emergency stops, run unnecessary sim codes, etc. When you're blessed with a smart enduser, don't waste their patience by making them run in circles.

    I think my point that this thread is unnecessarily hostile, stands. I know I haven't helped much in that regard. Still, I did read the entire thread before posting, and I've provided valuable advice that had some archival merit, before it got buried by this comical circle-jerk. You're patting yourselves on the back but ignoring the fact you failed to solve the problem.

    Phil B: a great percentage of your posts are rude and abusive with zero provocation. I figured you had thick enough skin to handle being called a noob. Not sure what a red card is but three of them seems excessive.
    well noob.. I can only throw one a day.

    grow the fuck up.. or are your brains frozen like the other libs from your cuntry?

    31yrs in the industry.. you are a puppy back under the porch.

    FYI a red card is a BAD mark .. And I misspoke earlier I stated 129posts 0 rep points.. you only have 30 posts and already 3 reds. GOOD JOB! I see you are helping people left n right.

    most users start with one green card.. just for posting in Newbies forum.

    you earn green cards when people like/thank you comments enough ( not sure how many it takes ) But you are going in the wrong direction.

    so long noob

  5. #95
    Technician
    Join Date
    Aug 2019
    Location
    Canada
    Posts
    37
    Rep Power
    3

    Re: MX-3110N Faded Prints, Copies Good

    Quote Originally Posted by BillyCarpenter View Post
    Congrats, you know how do clean some sensors. Wouldn't have helped this particular problem, but I get it, you know how to clean some sensors. I don't know why you're so busy patting yourself on the back when your "advice" would have done NOTHING to fix the problem. I'm confused.....
    We still don't know 100% what the solution was, unless you think the tech actually replaced the LSU. Most likely 5 minutes of cleaning and calibrating like I said. OP was thankful he didn't have to dump a bunch of money into parts, after all, and a new laser unit is like 500 bucks.

    BTW I did have about 15 rep before this thread.. you all must have down-repped me multiple times.. very mature, thank you.

  6. #96
    Service Manager 10,000+ Posts
    MX-3110N Faded Prints, Copies Good

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    10,991
    Rep Power
    262

    Re: MX-3110N Faded Prints, Copies Good

    Quote Originally Posted by BillyCarpenter View Post
    Congrats, you know how do clean some sensors. Wouldn't have helped this particular problem, but I get it, you know how to clean some sensors. I don't know why you're so busy patting yourself on the back when your "advice" would have done NOTHING to fix the problem. I'm confused.....

    The actual fix was to replace the MFP board. Nothing to do with cleaning any sensors.
    that's just the way some newbies roll.they find ONE fix that works for them and they can't think outside the box a little. His Boss must be proud!!

  7. #97
    Service Manager 1,000+ Posts
    MX-3110N Faded Prints, Copies Good

    BillyCarpenter's Avatar
    Join Date
    Aug 2020
    Location
    Long Beach, Mississippi
    Posts
    2,466
    Rep Power
    87

    Re: MX-3110N Faded Prints, Copies Good

    Quote Originally Posted by doyvid View Post
    We still don't know 100% what the problem was, unless you think the tech actually replaced the LSU. Most likely 5 minutes of cleaning and calibrating. OP was thankful he didn't have to dump a bunch of money into parts, after all, and a new laser unit is like 500 bucks.

    Let me explain my problem with you. I have great respect for the techs on this site. They've helped me every time I asked for help. They didn't have to help me or anyone else. They did it out of the kindness of their heart. Don't be calling these techs a bunch of noobs. How dare you.

  8. #98
    Service Manager 10,000+ Posts
    MX-3110N Faded Prints, Copies Good

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    10,991
    Rep Power
    262

    Re: MX-3110N Faded Prints, Copies Good

    Quote Originally Posted by doyvid View Post
    We still don't know 100% what the solution was, unless you think the tech actually replaced the LSU. Most likely 5 minutes of cleaning and calibrating like I said. OP was thankful he didn't have to dump a bunch of money into parts, after all, and a new laser unit is like 500 bucks.

    BTW I did have about 15 rep before this thread.. you all must have down-repped me multiple times.. very mature, thank you.
    like I said. I can only throw one card.. i threw only one..someone else had to have dinged you..

    you might wanna read the sites FAQ's before you go defaming someone. That could lead you to be REPORTED to admin for further considerations.

    OP said MFP bd.

  9. #99
    Service Manager 10,000+ Posts
    MX-3110N Faded Prints, Copies Good

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    10,991
    Rep Power
    262

    Re: MX-3110N Faded Prints, Copies Good

    Quote Originally Posted by BillyCarpenter View Post
    Let me explain my problem with you. I have great respect for the techs on this site. They've helped me every time I asked for help. They didn't have to help me or anyone else. They did it out of the kindness of their heart. Don't be calling these techs a bunch of noobs. How dare you.
    give a fella enough rope...... Nuff Said?


    outta here

  10. #100
    Technician
    Join Date
    Aug 2019
    Location
    Canada
    Posts
    37
    Rep Power
    3

    Re: MX-3110N Faded Prints, Copies Good

    Quote Originally Posted by Phil B. View Post
    OP said MFP bd.
    That was mansart's diagnosis, not the tech who visited.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here