do us all a favor...
1) make a small contribution to keep CTN running
2) post a manual request here----> https://www.copytechnet.com/forums/s...nual-requests/
the contributor badge will show the guys with the manuals that:
1) you made a contribution
2) you are likely to get quicker service on your request
you seem to be stumbling with simple things .. the manual is your best recourse .. Copiertec and I have tried n tried
hell 5 PAGES to this thread and the thread is only 1 day old.
another suggestion is to HIRE a TRAINED tech..
you've gotten alot of help for NADA - ZIP - ZILCH so far.
some people shouldn't try to fix their own machines.
Try 46-74 for both copy and print. Also check 26-18 for TS mode is off. If not this might be the SD card. Had the same on a MX2310 where you would calibrate it, it would try to save the calibration to the SD but it would fail, so it would revert back to factory settings, but only on print...
Hi
sometimes the problem is in front of the device
I can confirm that toner save is turned off for all modes
46-74 I ran and found the output a bit confusing
https://i.imgur.com/PSQEhlu.jpg
Seams like the corrected patch is faded. Maybe I'm off here but the original patch seams accurate
Try the following.....
Do test print SIM 64-5, then do a test print with SIM 64-2.
Are they both light? Or is one better than the other?
These test prints originate from different boards and can point you in the right direction.
Bookmarks