Dislikes:
0
-
Junior Member
- Rep Power
- 0
How to program Capri MFP PRG u500c1
hi to all , i am newbie in here and before i didn't program any of sharp copy printer device , anyone can help me ?
i have a sd card with name Capri MFP_PRG u500c1 that when i put it on my device not working but when i insert another sd card with this name device boot without any problem . i want to know how can i program that sd card or copy correct SD card to wrong SD Card ? i check some of post and see HDD raw disk but both of sd card are unallocated in my windows ! i must use specified device or operating system to get backup from my sdcard ?
please help me . i have many sharp device with this problem and i can not fix that , my sdcard is 8 gb
-
Re: How to program Capri MFP PRG u500c1
Take your good sd card and plug it into your computer. X out of whatever windows tells you to do. Open raw copy and copy the card. Now put your blank card into your computer and copy the file you saved to that card. Done.
-
Junior Member
- Rep Power
- 0
Re: How to program Capri MFP PRG u500c1
thanks for your answer
i am doing what that you said , i hope this work , are you sure this is ok ? i ask this because my sharp devices is not here , i must test sd card tomorrow .
and another question is can i buy new sdcard with other brand like samsung or kingston brand or i must buy specified sdcard ?
thank you
-
Re: How to program Capri MFP PRG u500c1
We use sandisk cards. Just have to make sure the card is the same size or larger.
-
Junior Member
- Rep Power
- 0
Re: How to program Capri MFP PRG u500c1
thank you so much for your help
-
Junior Member
- Rep Power
- 0
Re: How to program Capri MFP PRG u500c1
hi again and sorry for ask many question
but when we want to save image file there are two option : 1- Image Compress"imgc file" 2- raw image "dd file"
i save image as imgc file , that is true or i must save as dd file ?
and also when i clone my backup to new sdcard and get a backup from new sdcard that was a little bit less than first backup file
my first backup file was 279,884KB but second backup from new sdcard is 279,876 KB
is that make problem for me ?
-
Junior Member
- Rep Power
- 0
Re: How to program Capri MFP PRG u500c1
and last question is that if i send you Model name of my sharp device then can you send correct backup file to me ?
-
Junior Member
- Rep Power
- 0
Re: How to program Capri MFP PRG u500c1
Hi
is there any place for download backup of other copy hdd ?
-
Junior Member
- Rep Power
- 0
Re: How to program Capri MFP PRG u500c1
Hi sht,
i have a SHARP MX-M314n its sd card damaged.
Plz. Can you transfer ou upload me the backup of your SD card.
I already have a backup of SHARP MX-M315NV (Nova-EV MFP_PRG u302v1) someone needs it.
My email : emeland85@gmail.com
Best Regards.
-
Junior Member
- Rep Power
- 0
Re: How to program Capri MFP PRG u500c1
Hi Sht
Plz, Can you transfer ou upload me the backup of your SD card.
my mail: emeland85@gmail.com
Best Regards.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks