Page 4 of 6 FirstFirst 123456 LastLast
Results 31 to 40 of 54
  1. #31
    Field Supervisor 500+ Posts
    Toshiba version of MX-M1205 not printing

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    676
    Rep Power
    43

    Re: Toshiba version of MX-M1205 not printing

    will it process a job directly from USB key?

  2. #32
    The Wolf 1,000+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    C-town
    Posts
    1,826
    Rep Power
    65

    Re: Toshiba version of MX-M1205 not printing

    SIM 67-17 to dump print and NIC settings.
    Use a TCP/IP and configure the port to use LPR (default is RAW)
    Also, in the webpage, there is a "drag and drop" option to print direct to machine via webpage...does this render the print job?
    What does the job log say , any errors?


    Last edited by mojorolla; 2 Weeks Ago at 09:55 PM.
    Failing to plan is planning to fail!!!

  3. #33
    Trusted Tech 50+ Posts Rusty.Harris's Avatar
    Join Date
    Jan 2021
    Location
    Springfield, MO
    Posts
    54
    Rep Power
    1

    Re: Toshiba version of MX-M1205 not printing

    Quote Originally Posted by mansart View Post
    will it process a job directly from USB key?
    Yep, printed it just fine. Copied a PDF to the thumb drive, printed perfectly.

  4. #34
    Trusted Tech 50+ Posts Rusty.Harris's Avatar
    Join Date
    Jan 2021
    Location
    Springfield, MO
    Posts
    54
    Rep Power
    1

    Re: Toshiba version of MX-M1205 not printing

    Well THAT was interesting. Set it to LPR and RAW it did the same thing.
    Yes, in the web page access, there IS a print from the webpage. I submitted a 354k PDF.
    It took it...the status at the bottom of the screen said "waiting for (IP address). Then the
    I don't know what webpage you were looking for, but it's gone now message showed up.
    Tried to go back to it, but it was gone. Went to the machine to check the job status, the
    entire machine was LOCKED up, no response from the touch panel. Had to reboot the
    machine with the hard on/off inside the front door to get the machine back up.
    Can anyone say FUBAR?




    Quote Originally Posted by mojorolla View Post
    SIM 67-17 to dump print and NIC settings.
    Use a TCP/IP and configure the port to use LPR (default is RAW)
    Also, in the webpage, there is a "drag and drop" option to print direct to machine via webpage...does this render the print job?
    What does the job log say , any errors?



  5. #35
    Junior Member Blind Avocado's Avatar
    Join Date
    Jan 2021
    Location
    Rialto, CA
    Posts
    8
    Rep Power
    0

    Re: Toshiba version of MX-M1205 not printing

    Quote Originally Posted by Rusty.Harris View Post
    I'm on 20H2. We even tried to print from a Mac...same problem. He has the newest Mac
    with that M1 or whatever they call it chip.

    Printed out a network config page...
    Shows 100Base-T Duplex: Full
    Status Print: Yes
    TCP/IP status enabled, DHCP disabled (I'm using static)
    Ip, sub, gateway all ok
    Netware disabled
    Netbios disabled.

    Try turning on DHCP and let it pick an IP and use that and see if it will print. You can always turn it back off later

  6. #36
    Junior Member
    Join Date
    Feb 2021
    Location
    Billings
    Posts
    1
    Rep Power
    0

    Re: Toshiba version of MX-M1205 not printing

    Quote Originally Posted by Rusty.Harris View Post
    Well THAT was interesting. Set it to LPR and RAW it did the same thing.
    Yes, in the web page access, there IS a print from the webpage. I submitted a 354k PDF.
    It took it...the status at the bottom of the screen said "waiting for (IP address). Then the
    I don't know what webpage you were looking for, but it's gone now message showed up.
    Tried to go back to it, but it was gone. Went to the machine to check the job status, the
    entire machine was LOCKED up, no response from the touch panel. Had to reboot the
    machine with the hard on/off inside the front door to get the machine back up.
    Can anyone say FUBAR?
    If the machine is locking up like that, it could be the MFPC PWB or even the SD card. The SD is usually related to a boot issue, but anything seems to be possible with this machine. Except for printing, of course

  7. #37
    Trusted Tech 50+ Posts Rusty.Harris's Avatar
    Join Date
    Jan 2021
    Location
    Springfield, MO
    Posts
    54
    Rep Power
    1

    Re: Toshiba version of MX-M1205 not printing

    Tried that first...still no go.


    Quote Originally Posted by Blind Avocado View Post
    Try turning on DHCP and let it pick an IP and use that and see if it will print. You can always turn it back off later

  8. #38
    Trusted Tech 50+ Posts Rusty.Harris's Avatar
    Join Date
    Jan 2021
    Location
    Springfield, MO
    Posts
    54
    Rep Power
    1

    Re: Toshiba version of MX-M1205 not printing

    I'm kind of zeroed in on that board as well. The Toshiba machines have integrated Nic/system boards, which is what this one
    appears to be. Not to mention, in my parts book, it appears that the part number has changed a couple times.
    That is either a manufacturing/production change, or and UPDATE change.
    I always tell my guys if a board is bad, it usually happens within 30 days or so. Unless they get a voltage hit from the line
    It usually isn't a board issue. I try to talk myself out of changing a board because over the years they've just gotten so
    stable, that after "a break in period" they usually just don't go bad.

    Quote Originally Posted by WackyJack View Post
    If the machine is locking up like that, it could be the MFPC PWB or even the SD card. The SD is usually related to a boot issue, but anything seems to be possible with this machine. Except for printing, of course

  9. #39
    Field Supervisor 500+ Posts
    Toshiba version of MX-M1205 not printing

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    676
    Rep Power
    43

    Re: Toshiba version of MX-M1205 not printing

    Have you reset this machine back to factory default?

    Is Account control turned on????

  10. #40
    Trusted Tech 50+ Posts Rusty.Harris's Avatar
    Join Date
    Jan 2021
    Location
    Springfield, MO
    Posts
    54
    Rep Power
    1

    Re: Toshiba version of MX-M1205 not printing

    No account codes, machine has been reset a couple times.

    Quote Originally Posted by mansart View Post
    Have you reset this machine back to factory default?

    Is Account control turned on????

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here