Page 5 of 6 FirstFirst 123456 LastLast
Results 41 to 50 of 54
  1. #41
    Field Supervisor 500+ Posts
    Toshiba version of MX-M1205 not printing

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    676
    Rep Power
    43

    Re: Toshiba version of MX-M1205 not printing

    sorry if any of this has been covered before.....

    will machine print an internal print, sim 64-4?

    I know you said it prints from USB, but will it print from HDD. Store doc on machine via Doc Storage, will a stored doc print directly from HDD?

  2. #42
    The Wolf 1,000+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    C-town
    Posts
    1,826
    Rep Power
    65

    Re: Toshiba version of MX-M1205 not printing

    Sounds like a read/write problem for the print memory. You can go into SIM mode and perform a read/write test for the various memory and the HDD.


    Failing to plan is planning to fail!!!

  3. #43
    Trusted Tech 50+ Posts Rusty.Harris's Avatar
    Join Date
    Jan 2021
    Location
    Springfield, MO
    Posts
    54
    Rep Power
    1

    Re: Toshiba version of MX-M1205 not printing

    Yeah, noticed that when I was in there the other day looking for things. HDD & Memory all passed.
    I'm 99% sure the MFPC board is the issue. I'm just waiting on feedback from Toshiba before I order
    a replacement at this point.

    Quote Originally Posted by mojorolla View Post
    Sounds like a read/write problem for the print memory. You can go into SIM mode and perform a read/write test for the various memory and the HDD.



  4. #44
    Senior Tech 100+ Posts
    Join Date
    Jun 2011
    Posts
    101
    Rep Power
    21

    Re: Toshiba version of MX-M1205 not printing

    Go to the machine screen. There used to be a setting on the old MXM850 Hercules 1 that would disable printing, and turns off if you did a factory reset. I don't know specifically where but if you go to the machine and check under printer/nic settings, it was literally a tickbox that you had to check in order to get it to print. I don't have one here to check, but it is worth taking a look through the menus. The menu wasn't there on web browser, only on the screen.

  5. #45
    Trusted Tech 50+ Posts Rusty.Harris's Avatar
    Join Date
    Jan 2021
    Location
    Springfield, MO
    Posts
    54
    Rep Power
    1

    Re: Toshiba version of MX-M1205 not printing

    Quote Originally Posted by chubblies View Post
    Go to the machine screen. There used to be a setting on the old MXM850 Hercules 1 that would disable printing, and turns off if you did a factory reset. I don't know specifically where but if you go to the machine and check under printer/nic settings, it was literally a tickbox that you had to check in order to get it to print. I don't have one here to check, but it is worth taking a look through the menus. The menu wasn't there on web browser, only on the screen.

    Went through the entire network settings menu, didn't find anything though.

  6. #46
    Trusted Tech 50+ Posts Rusty.Harris's Avatar
    Join Date
    Jan 2021
    Location
    Springfield, MO
    Posts
    54
    Rep Power
    1

    Re: Toshiba version of MX-M1205 not printing

    Replaced the MFPC board...still no go. I think we are to the point to have the manufacturer
    come down and just haul it off and give us another one. I don't like sending out machines that
    might have ghosts in them.

  7. #47
    Trusted Tech 50+ Posts mloudy's Avatar
    Join Date
    Oct 2015
    Location
    Greenville, OH
    Posts
    65
    Rep Power
    12

    Re: Toshiba version of MX-M1205 not printing

    Long shot. The only thing that came to mind was SIM 26-38, B which will disable printing when the fuser web has ended. Try setting B to 0.

    Perhaps the 'web end' has triggered somehow but I would think it would indicate that on the display.

  8. #48
    Senior Tech 100+ Posts
    Join Date
    Jun 2011
    Posts
    101
    Rep Power
    21

    Re: Toshiba version of MX-M1205 not printing

    Quote Originally Posted by Rusty.Harris View Post
    Went through the entire network settings menu, didn't find anything though.
    The tickbox isn't in the NIC page. Try system settings>print settings> are there any tickboxes within any menus in there?

  9. #49
    Senior Tech 100+ Posts
    Join Date
    Jun 2011
    Posts
    101
    Rep Power
    21

    Re: Toshiba version of MX-M1205 not printing

    Quote Originally Posted by chubblies View Post
    The tickbox isn't in the NIC page. Try system settings>print settings> are there any tickboxes within any menus in there?
    After a bit of hunting down, this is what we had preventing printing before.
    Make sure NIC is enabled in this setting. If it is disabled, you can still web browse but printing via nic will not work. Pointless setting that will ruin your day
    Screenshot 2021-02-22 210331.jpg

  10. #50
    Trusted Tech 50+ Posts mloudy's Avatar
    Join Date
    Oct 2015
    Location
    Greenville, OH
    Posts
    65
    Rep Power
    12

    Re: Toshiba version of MX-M1205 not printing

    I un-checked the Enable Network Port and was still able to navigate the web page. Print jobs would not print. This is on a MX-6240. Grasping at straws.

    System Settings
    Printer Settings
    Interface Settings

    ENP.jpg

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here