Thanks: 
Likes: Had this error on an MX-4100N last week and it turned out the cleaning unit on the ITB was binding and causing the belt not to rotate, and then a jam. Never saw that before. Easy to check next time you are there.
Dislikes: 0
Had this error on an MX-4100N last week and it turned out the cleaning unit on the ITB was binding and causing the belt not to rotate, and then a jam. Never saw that before. Easy to check next time you are there.
Fuser fixed it for us, same symptoms.
Worth checking the connector pins if you have it in the workshop.Originally Posted by JR2ALTA
I recently saw the return spring loose for the fuser sensor lever. Intermittent jams, spring placement seems very prone to having the spring slip off metal tab- machines still works...mostly.
Fuser replacement would definitely fix it
But if this sensor arm was to wobble around in/out of the sensor or not returning home, I could see it causing H5-01 codes
Reply With Quote
Bookmarks