Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Technician
    Join Date
    May 2013
    Posts
    17
    Rep Power
    17

    MX5111N Copy quality automatically adjusting after every copy

    Hey guy's I got a Sharp MX-5111N that if you want to make anymore then just one copy the copier says "Please wait automatically adjusting copy quality" after every copy. Takes a half hour to run 30 copies. Any ideas?
    TIA!

    Josh

  2. #2
    Service Manager 10,000+ Posts
    MX5111N Copy quality automatically adjusting after every copy

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,079
    Rep Power
    368

    Re: MX5111N Copy quality automatically adjusting after every copy

    Quote Originally Posted by pohaku View Post
    Hey guy's I got a Sharp MX-5111N that if you want to make anymore then just one copy the copier says "Please wait automatically adjusting copy quality" after every copy. Takes a half hour to run 30 copies. Any ideas?
    TIA!

    Josh
    are they running generic toner?

    is the machine clean?

    what are the page counts on the drums/toners?

    we really need more info to help you out.

    you have been here since 2013... your profile doesn't state:

    if you are a tech

    what machines you last were trained on

    favorite/hated copier brands

    seems like you don't like sharing info on your problems nor yourself.

  3. #3
    Technician
    Join Date
    May 2013
    Posts
    17
    Rep Power
    17

    Re: MX5111N Copy quality automatically adjusting after every copy

    Quote Originally Posted by Phil B. View Post
    are they running generic toner?

    is the machine clean?

    what are the page counts on the drums/toners?

    we really need more info to help you out.

    Copier is clean, Firmware is up to date. The page count and percentages are low. Not calling for maintenance and they use sharp toner

  4. #4
    Technician
    Join Date
    May 2013
    Posts
    17
    Rep Power
    17

    Re: MX5111N Copy quality automatically adjusting after every copy

    Quote Originally Posted by Phil B. View Post
    are they running generic toner?

    is the machine clean?

    what are the page counts on the drums/toners?

    we really need more info to help you out.

    you have been here since 2013... your profile doesn't state:

    if you are a tech

    what machines you last were trained on

    favorite/hated copier brands

    seems like you don't like sharing info on your problems nor yourself.
    Really? If you have no respone other than this why comment? MX4070N was the last machine I was trained on. Hope that helps

  5. #5
    Service Manager 10,000+ Posts
    MX5111N Copy quality automatically adjusting after every copy

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,079
    Rep Power
    368

    Re: MX5111N Copy quality automatically adjusting after every copy

    Quote Originally Posted by pohaku View Post
    Really? If you have no respone other than this why comment? MX4070N was the last machine I was trained on. Hope that helps
    youo need to fill out your profile so you don't get questioned again.

  6. #6
    Technician
    Join Date
    May 2013
    Posts
    17
    Rep Power
    17

    Re: MX5111N Copy quality automatically adjusting after every copy

    Quote Originally Posted by Phil B. View Post
    youo need to fill out your profile so you don't get questioned again.
    I need to do a lot of things thanks

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Aug 2014
    Location
    port huron,michgan
    Posts
    53
    Rep Power
    14

    Re: MX5111N Copy quality automatically adjusting after every copy

    I have seen this on the older models when they need all drums and developers
    replaced and calibrated. Other times it has been the primary belt sensors needing
    a good cleaning.

  8. #8
    Technician
    Join Date
    May 2013
    Posts
    17
    Rep Power
    17

    Re: MX5111N Copy quality automatically adjusting after every copy

    Quote Originally Posted by tee View Post
    I have seen this on the older models when they need all drums and developers
    replaced and calibrated. Other times it has been the primary belt sensors needing
    a good cleaning.

    Thank you for a quality answer. I really appreciate it.

    Josh

  9. #9
    Senior Tech 250+ Posts
    Join Date
    May 2010
    Location
    Dallas, TX
    Posts
    309
    Rep Power
    31

    Re: MX5111N Copy quality automatically adjusting after every copy

    I agree with the post about new supplies. Another thing to check is are the density sensors clean and are there no scratches on the pri belt where the patches run that are looked at by the density sensor. Also has anyone tried calibrating with a jig?

  10. #10
    Technician
    Join Date
    May 2013
    Posts
    17
    Rep Power
    17

    Re: MX5111N Copy quality automatically adjusting after every copy

    Quote Originally Posted by repn1999 View Post
    I agree with the post about new supplies. Another thing to check is are the density sensors clean and are there no scratches on the pri belt where the patches run that are looked at by the density sensor. Also has anyone tried calibrating with a jig?

    Thanks for the reply. I will clean the sensors and think Im just gonna do a full pm.. I do not believe this model copier has the calibration jig. Correct me if I'm wrong tho. Thanks again.

    Josh

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here