sharp mx3050n

[Nachoman4life]

A freeze on the please wait screen has been a symptom of the "Expansion/Caching memory" ie.., the SD card, Msata, or EMMC for a long time.. A few early signs of it starting to read fail are, slow screen response, slow entrance into sim mode, long please waits, and long sharp logo waits. SD, and Msata can be cloned from a known good source, EMMC (which a 3050 has), will have to come from sharp for now. As of now I do not think a way of cloning them has been found out yet..

[Dcopyman]

Check for paper clip that falls on adf pwb. This causes weird issues

[mloudy]

A freeze on the please wait screen has been a symptom of the "Expansion/Caching memory" ie.., the SD card, Msata, or EMMC for a long time.. A few early signs of it starting to read fail are, slow screen response, slow entrance into sim mode, long please waits, and long sharp logo waits. SD, and Msata can be cloned from a known good source, EMMC (which a 3050 has), will have to come from sharp for now. As of now I do not think a way of cloning them has been found out yet..

I am pretty sure the MX-3050N has a mSata and can be cloned. I think it is the newest series, the MX-3051 that has the EMMC. I am almost certain I have done the MX-3050N and have a .imgc file stored in my HDDRawCopy Folder for a MX-3050N. I would also say the mSata and the HDD should be replaced together on this machine.

It would be nice if this mahcine had some MICAS history so you could see if there were any HDD, mSata error codes prior to the OP gettgin the machine.

[Demon33]

Are you able to get into simulation ?

If not as said before , hit the switch near the usb/network connector and do a firmware upgrade from usb .

I have a lot of those on the road & I would try a new msata as a first step if that don't work & be sure to take one from another mx-3050 series not 3070.

Good luck