Is there a way to make the printer report in toner-increments of 1% or 5% in the MIB file instead of 25%
I know this is possible with other models, but the simulation isnt available on the mx-c300p.
Is there a way to make the printer report in toner-increments of 1% or 5% in the MIB file instead of 25%
I know this is possible with other models, but the simulation isnt available on the mx-c300p.
Not possible as 26-69 value G is not available on that model.
Failing to plan is planning to fail!!!
Sim 55-3 sw32-2 set to 1 machine will report in 5% increments. This works on all MX models that doesn't have sim 26-69G
I am not sure on these. All of our equipment has gone out with SS 32 bit 2 set to 1. All of our MX-C300P, MX-C300W and MX-C301W machines are only reporting in 25% increments in MICAS.
Sorry I forgot it's a little different for the C300w. For the C300w it is sw2-7 set to 1 for 5% increments. I service more than 50 of these at a large account, we have them all reporting at 5% increments
Bookmarks