Dislikes: 0
Hello there !
I'm having some problems with an MX-3060V, customer called because of lines on the copy's.
I personally just thought the glass needs some cleaning, but then I saw these lines.
They only occure on Color copy's, b/w everything is fine, I've never had this problem.
Perhaps someone here got some suggestions ?
I hope you can see enough in those pictures:
- 64-01
- 22-06
Thanks in advance !
What have you done to try to correct the lines? What is the life on the drum kits? Have you performed a calibration?
Hi
how old are the main charger kitīs ? when they are yellow or brown, take new one.
Sorry guys I forgot to mention it only happens when using the scanner (copy/scan), I just used two examples for copy to show here. (64-01 and 22-06)
But I've already replaced the CCD and it fixed it.
Thanks anyways !
Does that model have a DSPF or RSPF? If DSPF, what would a 2 sided copy thru it look like?
3050 & 3060 (same for 51/61) generally come with just a RSPF.Originally Posted by kdr363
But theoretically one side should be fine with a DSPF.
Do a full optics clean; both sides of the glass, scanner mirrors, & lens. If it still occurs you could be looking at faulty SCU; or ribbon cables are loose.
Only in copies? Strange.
Looks like... a smudge in the mirrors, or could be that CCD unit.
More importantly, what does your scans look like? When you scan as a PDF, what does the document look like on the PC? If there are no image quality problems on the scanned document, then you're looking at a print engine problem.
Thanks guys, but its already fixed.
It was indeed the CCD unit.
Is there a way to mark the thread as solved ?
Thanks: 
Likes: 
Reply With Quote
Bookmarks