Thanks: 
Likes: 
Dislikes: Hi, I’ve got this code recurring randomly on a 2640, cleaned the yellow laser unit, new drum and charge kit, calibrated etc and all ok. Then back in again today, I’ve never had a laser fail on one of these? Have you or is it something else?
Hi, I’ve got this code recurring randomly on a 2640, cleaned the yellow laser unit, new drum and charge kit, calibrated etc and all ok. Then back in again today, I’ve never had a laser fail on one of these? Have you or is it something else?
I have it 2 times , 1 on MX-3110 and 1 on MX-2614. Both new LSU units
Do you just replace the yellow or the whole rack? Is it straightforward to do?Originally Posted by OlliK1969
The whole rack , the complete laser unit
would you know if the lasers are the same in a 2614 and a 2640 as I have a scrap 2514 here and could take the unit with me
I don't think so.
This is how the Parts Guide breaks them down:
MX-3140N, MX-2640N DUNT-8947DS11
MX-3116N, MX-2616N, MX-3115N, MX-2615N, MX-2615N, MX-3114N, MX-2614N DUNT-8502DS15
MX-3640N DUNT-8948DS14
Try updating with latest firmware
Reply With Quote
Bookmarks