Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member
    Join Date
    Aug 2021
    Location
    Khandar TX
    Posts
    5
    Rep Power
    0

    MX-M363N needs firmware

    Have a MX-M363N that we've been given at our new office and it boots up, gets on network, can access admin & service pages. But will not perform any function. Only error E7-21 which cannot be cleared.

    Would like to update firmware as may be communications issue. Have a new laser unit to go with it.

    Does anyone have firmware I can use to flash the machine you can put on dropbox or wetransfer?

  2. #2
    Service Manager 1,000+ Posts
    MX-M363N needs firmware


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: MX-M363N needs firmware

    Don't wait around. Throw that laser in it to fix your problem.

  3. #3
    Junior Member
    Join Date
    Aug 2021
    Location
    Khandar TX
    Posts
    5
    Rep Power
    0

    Re: MX-M363N needs firmware

    OK. Then flash with firmware, yes? Which is why I asked if anybody was willing to share. Thanks for the help.

  4. #4
    Service Manager 1,000+ Posts
    MX-M363N needs firmware


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: MX-M363N needs firmware

    Your original post implied you had a laser ready to go. I am telling you to install the laser as that's the most likely remedy. Firmware hasn't been released in 8 years on this model. You have a laser code, go with the laser.

  5. #5
    Junior Member
    Join Date
    Aug 2021
    Location
    Khandar TX
    Posts
    5
    Rep Power
    0

    Re: MX-M363N needs firmware

    Quote Originally Posted by JR2ALTA View Post
    Your original post implied you had a laser ready to go. I am telling you to install the laser as that's the most likely remedy. Firmware hasn't been released in 8 years on this model. You have a laser code, go with the laser.
    Yup. Popped the laser unit in, and no change. E7-21 indicates bad module, or bad communications which can be due to firmware mismatch. Or dead component. So before junking the machine I thought maybe I would see if anyone happened to have some fw they don't mind sharing which would allow me to give it a whirl because it's probably not worth throwing any more parts at a Sharp this old.

  6. #6
    Service Manager 1,000+ Posts
    MX-M363N needs firmware


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: MX-M363N needs firmware

    Do you still need it? message me where to send it.

  7. #7
    Junior Member
    Join Date
    Aug 2021
    Location
    Khandar TX
    Posts
    5
    Rep Power
    0

    Re: MX-M363N needs firmware

    Quote Originally Posted by JR2ALTA View Post
    Do you still need it? message me where to send it.
    Yes if someone has it. Might be helpful.

    I'll PM you with an email.

  8. #8
    Senior Tech 250+ Posts lky1978's Avatar
    Join Date
    Mar 2009
    Location
    perak malaysia
    Posts
    472
    Rep Power
    36

    Re: MX-M363N needs firmware

    Quote Originally Posted by planobum View Post
    Yup. Popped the laser unit in, and no change. E7-21 indicates bad module, or bad communications which can be due to firmware mismatch. Or dead component. So before junking the machine I thought maybe I would see if anyone happened to have some fw they don't mind sharing which would allow me to give it a whirl because it's probably not worth throwing any more parts at a Sharp this old.
    FYi, FW no help in this issue..repalce the LSU ...we already fix many units e7-21

  9. #9
    Junior Member
    Join Date
    Aug 2021
    Location
    Khandar TX
    Posts
    5
    Rep Power
    0

    Re: MX-M363N needs firmware

    Quote Originally Posted by lky1978 View Post
    FYi, FW no help in this issue..repalce the LSU ...we already fix many units e7-21
    I wish. Already replaced the LSU and no joy. Updated firmware to rule out communications issues and also not fixed. Therefore given the age of the unit, we're going to scrap it. If anyone is in the Dallas TX area and wants it let me know quickly.

  10. #10
    Junior Member
    Join Date
    Oct 2013
    Location
    riyadh
    Posts
    5
    Rep Power
    0

    Re: MX-M363N needs firmware

    Quote Originally Posted by JR2ALTA View Post
    Do you still need it? message me where to send it.
    Hi sir I need sharp dx2500 firmware my mail id salam.ullal@yahoo.com

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here