Thanks:
0
Likes:
0
Dislikes:
0
-
Junior Member
- Rep Power
- 0
L4-08 sharp mxm850
I have a big problem with the Sharp mxm850 copier - the code appears l4-08 (WASTE TONER TRANSPORT PIPE LOCK), and I changed the entire exhaust pipe and the switch for waste exhaust was changed - the rubber belt of the gears in the machine was changed - all of that and the code still remains I do not find a solution - other than that I send the company that produces the same product, and you are the makers of the machine - I ask you to send the solution - and do not tell me to go to the merchant - I am the merchant himself and I do not know the solution
-
Re: L4-08 sharp mxm850
Is the Drum rotating?
sim 6-1 and watch everything rotate
-
Junior Member
- Rep Power
- 0
Re: L4-08 sharp mxm850
The dram rotates half a turn and then stops and the error appears - and when sim 6-1 is used, everything works very efficiently - but the malfunction still exists
-
Junior Member
- Rep Power
- 0
-
Junior Member
- Rep Power
- 0
Re: L4-08 sharp mxm850
Originally Posted by
oscarconil
check the sensor
which sensor ??
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks