Sharp/Lexmark

[mloudy]

Post any questions you have here and I will do my best to help. We have been working with Lexmark since the summer of 2016 and I have access to Lexmark service support documents.

For this engine we have 217 in the field so we have seen a thing or two.

The most helpful advice I can provide will be from actual experience. Unfortunately Sharpmark firmare will probably always be a minimum of 2 levels older than Lexmark so any fixes addressed by a firmare update will be a sit and wait situation for Sharp dealers.

[tsbservice]

As of Firmware, actually I attempted Konica firmware for A4 B&W model on its original made from Brother and it won't let me go. Probably same here.

[blackcat4866]

The Lexmark originals use a single ".fls" file.

The Konica Minolta Lexmarks use four ".prn" files.

Not sure about the Sharp Lexmarks. =^..^=

[mloudy]

Sharpmarks use a fls file

In fact is is named exactly the same.

CXTAT.075.277 is the current MX-C407F firmware from Sharp.

CXTAT.075.281 is the current XC4140 firmware from Lexmark.

[SalesServiceGuy]

I know Lexmark has not given Sharp helpdesk anything to help us with. I had a C407 out of the box with several different kind of lines, would have been easier if they just sent me a new machine instead of every single part in it.

FYI you can call the lexmark hotline for help they just won't send any parts like Sharp will.

... if you enjoy voicemail jail give Lexmark a call.

[oscarconil]

someone has tried this firmware lexmark on the sharp


[QUOTE = mloudy; 1966919] Sharpmarks usa un archivo fls.

De hecho, se llama exactamente igual.

CXTAT.075.277 es el firmware MX-C407F actual de Sharp.

CXTAT.075.281 es el firmware XC4140 actual de Lexmark. [/ QUOTE]