Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: Sharp/Lexmark

  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Aug 2011
    Location
    Olympia , Wa
    Posts
    51
    Rep Power
    26

    Sharp/Lexmark

    Well now that I am Lexmark tech (it says Sharp on the front) I do not know how to get into the diagnostics of these machines. Any help would be appreciated.

  2. #2
    Master Of The Obvious 10,000+ Posts
    Sharp/Lexmark

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,469
    Rep Power
    463

    Re: Sharp/Lexmark

    Do you have access to manuals? What models are you working on? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior Tech 100+ Posts Prints Charming's Avatar
    Join Date
    Aug 2019
    Location
    In the crawlspace
    Posts
    189
    Rep Power
    27

    Re: Sharp/Lexmark

    Diagnostic Menu: *, *, 3, 6 from Ready Status, or Hold buttons 3 & 6 from Power Up.
    Safe Mode: Hold Buttons 6 & 7 from Power Up (allows use of device even with an error condition).
    Invalid Engine Code: Hold Buttons 3, 4 & 6 from Power Up (allows access printer webpage to perform update of firmware).

    Lexmark codes have been the same for many years. Works on the Sharps too.

  4. #4
    Service Manager 5,000+ Posts
    Sharp/Lexmark

    SalesServiceGuy's Avatar
    Join Date
    Dec 2009
    Location
    Nova Scotia
    Posts
    7,728
    Rep Power
    225

    Re: Sharp/Lexmark

    Quote Originally Posted by Prints Charming View Post
    Diagnostic Menu: *, *, 3, 6 from Ready Status, or Hold buttons 3 & 6 from Power Up.
    Safe Mode: Hold Buttons 6 & 7 from Power Up (allows use of device even with an error condition).
    Invalid Engine Code: Hold Buttons 3, 4 & 6 from Power Up (allows access printer webpage to perform update of firmware).

    Lexmark codes have been the same for many years. Works on the Sharps too.

    ... hopefully, the same with Toshiba/ Lexmarks aka Toshmarks.

  5. #5
    Service Manager 1,000+ Posts
    Sharp/Lexmark


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: Sharp/Lexmark

    Quote Originally Posted by Prints Charming View Post
    Diagnostic Menu: *, *, 3, 6 from Ready Status, or Hold buttons 3 & 6 from Power Up.
    Safe Mode: Hold Buttons 6 & 7 from Power Up (allows use of device even with an error condition).
    Invalid Engine Code: Hold Buttons 3, 4 & 6 from Power Up (allows access printer webpage to perform update of firmware).

    Lexmark codes have been the same for many years. Works on the Sharps too.
    2-6 does something too. Clears counts, etc I believe

  6. #6
    Senior member of CRS 2,500+ Posts
    Sharp/Lexmark

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    3,368
    Rep Power
    102

    Re: Sharp/Lexmark

    Quote Originally Posted by JR2ALTA View Post
    2-6 does something too. Clears counts, etc I believe
    2-6 is Configuration (#2 key on your number dial), not sure about counter clear; 3-6 is Diagnostics (#3 key on key pad)
    Nice to know the other power on sequences by Prints Charming
    "You can't trust your eyes, if your mind is out of focus" --

  7. #7
    Junior Member
    Join Date
    Oct 2021
    Location
    cadiz
    Posts
    7
    Rep Power
    0

    Re: Sharp/Lexmark

    Does anyone know if you can change the shortcuts of the first screen. in the lexmark it is possible, but in the sharp it is not possible


    Thank you

  8. #8
    Master Of The Obvious 10,000+ Posts
    Sharp/Lexmark

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,469
    Rep Power
    463

    Re: Sharp/Lexmark

    You can make selection of what icons appear during the initial setup wizard. If you want to make different selections you must re-run the initial setup wizard. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  9. #9
    Service Manager 5,000+ Posts
    Sharp/Lexmark

    SalesServiceGuy's Avatar
    Join Date
    Dec 2009
    Location
    Nova Scotia
    Posts
    7,728
    Rep Power
    225

    Re: Sharp/Lexmark

    Quote Originally Posted by oscarconil View Post
    Does anyone know if you can change the shortcuts of the first screen. in the lexmark it is possible, but in the sharp it is not possible


    Thank you
    From the web browser: Settings/ Device/ Home Screen Icons

  10. #10
    Junior Member
    Join Date
    Oct 2021
    Location
    cadiz
    Posts
    7
    Rep Power
    0

    Re: Sharp/Lexmark

    I say the home screen where it appears easy copy, easy scan, easy fax

    I can't modify


    a come out

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here