Originally Posted by
Tech2002
When I changed out the Primary Transfer it was the whole unit.
I forgot to add that I have done a 61-1 Laser Check - Good
Firmware has been updated to most resent.
The issue I have described intermittent. It appears to only act up as described after it has
been working long runs. Plus I tried most of the suggestion recommended to me - very
appreciated.
Because the the long run and problem scenario I decided to change out the Transfer Control PWB.
It was the heat thing that made me to look in this direction. I've got it replaced and it is a wait
and see.
One of the up ticks with the replacement board the colors, from a copy to a copy - those color copies popped!
Just that alone made me think it was a good thing to have specifically changed out that board.
I'm not out of the woods yet, but will update in a week or so - it shouldn't take too long to see
a positive or negative final results.
I sincerely appreciate everyone's input!!!
Bookmarks