A0-30 error clearance.

[Noblemen]

How do I clear error code A0-30 in MX b201d copier?

[bilyahn]

This is a configuration error, which normally means a board mismatch. Did this just happen out of the blue?

[mojorolla]

Print out the 22-6 and check the soft switches for the scanner. I have had a few instances where all 8 bits of all the scanner switches change to 1 from the default of 0
This can generate A0 errors with SCN board changes or corrupted firmware.

[Noblemen]

Print out the 22-6 and check the soft switches for the scanner. I have had a few instances where all 8 bits of all the scanner switches change to 1 from the default of 0
This can generate A0 errors with SCN board changes or corrupted firmware.

Ok I do appreciate your contributions I shall reply as I carry out your suggestions thanks.