Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17
  1. #11
    Senior Tech 250+ Posts driving lots of miles's Avatar
    Join Date
    Jun 2016
    Location
    Kansas
    Posts
    360
    Rep Power
    22

    Re: Sharp Mx4071 slow to boot and run

    Quote Originally Posted by mloudy View Post
    I know you have installed a different HDD but that sounds like a bad HDD to me.

    Can you export the 22-6 to a thumb drive?
    Yes it exports to the thumb drive. I installed a new HDD but the machine wont come to ready.

  2. #12
    Field Supervisor 500+ Posts mloudy's Avatar
    Join Date
    Oct 2015
    Location
    Greenville, OH
    Posts
    684
    Rep Power
    38

    Re: Sharp Mx4071 slow to boot and run

    If you are able to export the 22-6 to a USB drive open the txt file and scroll down to almost the bottom. You will see the HDD. Likely a Toshiba MQ01.....

    If there is anything but all zeros in the two lines below it then the HDD has issues.

    HDD.jpg

    Have you done an end of lease wipe?

  3. #13
    Field Supervisor 500+ Posts mloudy's Avatar
    Join Date
    Oct 2015
    Location
    Greenville, OH
    Posts
    684
    Rep Power
    38

    Re: Sharp Mx4071 slow to boot and run

    Is there any chance the eeprom was installed backwards in the field prior to being picked up? I just read the Handy Guide instructions for proper eeprom handling and found this:

    1. Ensure to follow ESD procedures (using an earth strap) while handling the PWBs as EEPROM data may become corrupted due to static charge.2. Never insert the EEPROM to the socket in reverse.3. U2 trouble occurs 100% if the machine is turned on after inserting the EEPROM in reverse. Execution ofSim16 to clear this U2 trouble will lead to corrupted data which cannot be fully recovered in the field.

  4. #14
    Senior Tech 250+ Posts driving lots of miles's Avatar
    Join Date
    Jun 2016
    Location
    Kansas
    Posts
    360
    Rep Power
    22

    Re: Sharp Mx4071 slow to boot and run

    Quote Originally Posted by mloudy View Post
    If you are able to export the 22-6 to a USB drive open the txt file and scroll down to almost the bottom. You will see the HDD. Likely a Toshiba MQ01.....

    If there is anything but all zeros in the two lines below it then the HDD has issues.

    HDD.jpg

    Have you done an end of lease wipe?
    Unfortunately I have Numbers there. I installed a new HDD but it would not boot up. I cant do an end of lease at the moment as the password has been changed. I'm working on getting that.

  5. #15
    Service Manager 1,000+ Posts
    Sharp Mx4071 slow to boot and run

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    2,164
    Rep Power
    101

    Re: Sharp Mx4071 slow to boot and run

    Have you tried a 56-1,2 from another good 4071 and installed that on to the one you are having issues with? It will also reset password if needed.

  6. #16
    Trusted Tech 50+ Posts
    Sharp Mx4071 slow to boot and run


    Join Date
    Apr 2019
    Location
    los angeles
    Posts
    66
    Rep Power
    10

    Re: Sharp Mx4071 slow to boot and run

    that tool is ass, try this one Ic/cpu Rom Smd Chip Plcc Protection Pliers Bios Circuit Board Extractor Removal Machine Repair Clip Picker Hand Tool - Buy Plcc Protection Pliers,Bios Circuit Board Extractor,Circuit Board Extractor Product on Alibaba.com been using it for 5 years

    Quote Originally Posted by JLSam View Post
    First eeprom I removed was a actually on a 4140. I remember I was excited because I finally get an excuse to use a ROM REMOVAL TOOL on a cheap tech kit, that I had for YEARS.
    Looked like this:
    https://www.aliexpress.us/item/32568...400004817865_4

    Worked like ass, wound up using a flathead and spring tool.

    But yeah, I agree, those pins are bent so easily. And it's a hassle to get a replacement from SHARP.

  7. #17
    Senior Tech 250+ Posts driving lots of miles's Avatar
    Join Date
    Jun 2016
    Location
    Kansas
    Posts
    360
    Rep Power
    22

    Re: Sharp Mx4071 slow to boot and run

    Final solution was the new msata card the SCN MFP PWB, and new HDD.
    We are returning the machine tomorrow.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here