Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Senior MFP Technician 100+ Posts ihatefinishers13's Avatar
    Join Date
    Feb 2020
    Location
    US
    Posts
    246
    Rep Power
    15

    List of Sharp softswitches

    Over the last 9 years as a Sharp certified tech, we've been told that no one person has the list to every soft switch on a Sharp MFP - besides .

    I'm here to tell you that........I still don't have that list, I'm just looking to see what switches everyone has found useful?

    We change a couple for VOIP settings from 3 separate bulletins, as well as Address Hold, and toner alert settings.

    But what else ya got?

  2. #2
    Field Supervisor 500+ Posts JLSam's Avatar
    Join Date
    Jun 2015
    Location
    Los Angeles
    Posts
    575
    Rep Power
    45

    Re: List of Sharp softswitches

    Quote Originally Posted by ihatefinishers13 View Post
    Over the last 9 years as a Sharp certified tech, we've been told that no one person has the list to every soft switch on a Sharp MFP - besides .

    I'm here to tell you that........I still don't have that list, I'm just looking to see what switches everyone has found useful?

    We change a couple for VOIP settings from 3 separate bulletins, as well as Address Hold, and toner alert settings.

    But what else ya got?
    My favorite soft switch setting that has saved us $$ on the phoenix 1/2 models is: Sim 55-1, SW 32, Changing Bit 7 from 0 to 1.
    Every 1K, 1 fuser cleaning page.

    Needs the latest firmware.

  3. #3
    Senior Tech 100+ Posts
    List of Sharp softswitches

    havokprod's Avatar
    Join Date
    Oct 2012
    Location
    Los Angeles CA
    Posts
    136
    Rep Power
    27

    Re: List of Sharp softswitches

    These are the ones I have been able to compile from Bulletins and from this site. Equipment im working on is MX-Mxx3, MX-Mxx5, MX-Mxx50/70, MX-xx40, MX-xx50/70


    55-3 sw22 bit 5 from 0-1 shows toner guage
    55-3 sw22 bit 6 from 0-1 cancels DK,DC,DM,DY Stop Drum Maintenance


    55-3 sw27 bit 2 from 0-1 cancels VK,VC,VM,VY Stop Developer Maintenance
    55-3 sw27 bit 3 from 0-1 cancels FK1 & 2 Stop Fusing Unit Maintenance
    55-3 sw27 bit 4 from 0-1 cancels TK1 Stop Primary Transfer Unit Maintenance
    55-3 sw27 bit 5 from 0-1 cancels TK2 Stop Secondary Transfer Maintenance


    55-3 sw34 bit 1 from 0-1 cancels TK3 Stop Primary Transfer Discharge Maintenance
    55-3 sw34 bit 2 from 0-1 cancels MCK,MCC,MCM,MCY Stop Drum Charge Unit


    55-1 sw09 bit 8 from 0-1 Set Maintenance Cycle to prints instead of revolutions/turns

    55-1 sw06 bit 1 from 0-1 Set network speed to manual
    55-1 sw06 bit 4 from 0-1 Set speed to 100mb/s


    Sim 66-01


    sw 108 bit 8 from 0-1 Turns On Digital line net setting -15dBm

    sw 103 bit 6 from 0-1 ECM is turn Off (error resend)


    sw 27 bit 4 from 0-1 V.34 TX is disabled
    sw 27 bit 5 from 0-1 V.34 RX is disabled


    sw 29 bit 3 from 0-1
    sw 29 bit 4 from 0-1
    Used to set TX speed to V.17 14.4kbps

    sw 29 bit 5 from 0-1
    sw 29 bit 6 from 0-1
    sw 29 bit 7 from 0-1
    Used to set RX speed to V.17 14.4kbps

    sw 29 bit 8 from 0-1



    Please share any comments

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Jun 2016
    Posts
    458
    Rep Power
    23

    Re: List of Sharp softswitches

    SIM ITEM SW DATA OP OMSCHRIJVING
    ALL 21-1 999 A en B - cancels TA + CA
    ALL 26-35 A : : 1 any error
    ALL 26-38 B : : 0 maintenance life over 0
    BP-modellen 26-29 AUTO UPDATE
    MX-3060/3070/3570/4060-70/5070-6070 55-01 1 4 1 polygon motor
    MX-3060/3070/3570/4060-70/5070-6070 55-01 9 8 1 Set Maintenance Cycle to prints (Instead of revolutions)
    MX-C300P 55-3 2 7 1 toner MIB report 5%
    ALLE 55-03 3 7 1 HP compatibility mode
    MX-3060/3070/3570/4060-70/5070-6070 55-03 4 7 1 Custom paper size tray1 on Phoenix(2)/Griffin(2)
    MX-B350P MX-B450P MX-300P 55-3 8 8 1 Machine unable to wake up from sleep mode
    ALLE 55-03 9 5 1 Allow printing when maintenance Due
    ALLE 55-03 22 5 1 Show toner icons on screen
    ALLE 55-3 27 2 1 cancels VK VC VM VY notification
    ALLE 55-3 27 3 1 cancels FK123 notification
    ALLE 55-3 27 4 1 cancels TK2 notification
    ALLE 55-3 27 5 1 cancels TK1 notification
    ALLE 55-03 28 3 1 errors 1x mailen
    MX-3060/3070/3570/4060-70/5070-6070 55-03 30 3 1 Retain destination address
    MX-3060/3070/3570/4060-70/5070-6070 55-03 32 2 1 toner MIB report 5%
    ALLE 55-3 34 1 1 cancels TK3 notification
    ALLE 55-3 34 2 1 cancels MCK MCC MCM MCY notification
    MX-3060/3070/3570/4060-70/5070-6070 55-03 34 3 1 USB print PDF files
    MX-2630/3060/3070/3570/4060-70/5070-6070 55-03 44 2,3 1 Blank page skip disable confirmation message
    MX-2630/3060/3070/3570/4060-70/5070-6070 55-03 48 all 0 set trays via webpagina
    MX-3060/3070/3570/4060-70/5070-6070 66-01 95 7 1 Blank page skip disable cancel if confirmation is not pressed

  5. #5
    Senior Tech 250+ Posts
    Join Date
    Jun 2016
    Posts
    458
    Rep Power
    23

    Re: List of Sharp softswitches

    and these ones:
    55-3 45 1 1 cache user info (365) in device account modus
    55-1 32 567 001 = 1K / 010 = 5K / 011 = 10K AUTO FUSER CLEANING PAGE

  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Mar 2018
    Posts
    55
    Rep Power
    14

    Re: List of Sharp softswitches

    Does anyone know for what SW 35, Bit 1 is good for?

  7. #7
    Technician
    Join Date
    Sep 2023
    Location
    Berlin
    Posts
    21
    Rep Power
    2

    Re: List of Sharp softswitches

    Quote Originally Posted by pdy-pt View Post
    Does anyone know for what SW 35, Bit 1 is good for?
    To list all Error codes. But i don't know, if that was for the old copiers.

  8. #8
    Senior Tech 100+ Posts Hart's Avatar
    Join Date
    Feb 2024
    Location
    Boulevard Périphérique
    Posts
    111
    Rep Power
    7

    Re: List of Sharp softswitches

    My cheatsheet (poorly translated) :

    Réglages initiaux
    66-2 00111101 (Change the Fax country to France)
    66-1 SW-92 7 (This one was to keep the power in the USB port in Sleeping Mode)
    55-3 SW-9 5 (Block the "Change drum" on MacOS driver)
    55-3 SW-22 5 (To show the toner on the old generation, useless now)
    55-3 SW-24 7 (Continuous print when using Kayleigh/Job Accounting instead of pausing between each jobs)
    55-3 SW-30 3 (New settings will appears in the scanner section to hold the address after a scan instead of doing the usual ClearAll)
    55-1 SW-22 8 pour 5070 et 6070 (Fuser improvement)
    55-1 SW-31 1 pour 3071 à 4071 (Fuser improvement)
    55-1 SW-31 2 pour 5071 et 6071 (Fuser improvement)

    26-69 Toner e-mail alert 0 (Already the default since CR4)
    26-78 (Password for VNC)
    26-38 Continue (Won't block the MFP when asking for maintenance, it's On on the fuser per default)
    26-35 Any (Show all errors codes instead of the last one)

    CR5 Firmware
    26-29 AUTO (Automatic firmware upgrade available on the CR5)
    Puis Réglage de fonctionnements, mettre 21h à 23h

    CR5 Rouleau de charge qui marque en SDP pendant les vacances scolaires
    55-1 SW-5 6 (New from the last firmware, the drum will rotate slowly, avoiding the charging roller to flatten when the MFP is not in use, it's recommended for school that close for long periods of time)

    --------------------------------------------------

    Encrassement / feuille qui s'enroule autour du rouleau de pression du four sur la gamme CR4.5

    SIM 55-1 SW32 Data 5-7 (Will print a yellow page to clean the fuser)

    000 : Ne pas exécuter (par défaut)
    001 : 1k copies
    010 : 5k copies
    011 : 10k copies
    100 : 25k copies
    101 : 50k copies

    --------------------------------------------------

    Utiliser machine sans finisseur (The MFP will ignore if there is a stappler unit when you have to bring it to your shop, customers will be able to print but I recommend to put a piece of carton to block the papers falling)
    55-1 SW-24 7

    Limite nb jeux agrafés (Limite the number of pages for stappling, I can't remember when you are supposed to use it)
    26-65

    Retirer message suppression page blanche (Remove the confirmation when using "Blank Page Skip", and on a unit with DSPF, you can default the MFP to R/V + Bank Page Skip + remove the confirmation)
    55-3 SW-44 2 et 3

    DEV REFRESH
    44-17

    Reset compteurs (You know what it does ...)
    55-3 SW-18 6

    sims.pdf

  9. #9
    Technician
    Join Date
    Nov 2014
    Location
    Toledo
    Posts
    23
    Rep Power
    20

    Re: List of Sharp softswitches

    Quote Originally Posted by havokprod View Post
    These are the ones I have been able to compile from Bulletins and from this site. Equipment im working on is MX-Mxx3, MX-Mxx5, MX-Mxx50/70, MX-xx40, MX-xx50/70


    55-3 sw22 bit 5 from 0-1 shows toner guage
    55-3 sw22 bit 6 from 0-1 cancels DK,DC,DM,DY Stop Drum Maintenance


    55-3 sw27 bit 2 from 0-1 cancels VK,VC,VM,VY Stop Developer Maintenance
    55-3 sw27 bit 3 from 0-1 cancels FK1 & 2 Stop Fusing Unit Maintenance
    55-3 sw27 bit 4 from 0-1 cancels TK1 Stop Primary Transfer Unit Maintenance
    55-3 sw27 bit 5 from 0-1 cancels TK2 Stop Secondary Transfer Maintenance


    55-3 sw34 bit 1 from 0-1 cancels TK3 Stop Primary Transfer Discharge Maintenance
    55-3 sw34 bit 2 from 0-1 cancels MCK,MCC,MCM,MCY Stop Drum Charge Unit


    55-1 sw09 bit 8 from 0-1 Set Maintenance Cycle to prints instead of revolutions/turns

    55-1 sw06 bit 1 from 0-1 Set network speed to manual
    55-1 sw06 bit 4 from 0-1 Set speed to 100mb/s


    Sim 66-01


    sw 108 bit 8 from 0-1 Turns On Digital line net setting -15dBm

    sw 103 bit 6 from 0-1 ECM is turn Off (error resend)


    sw 27 bit 4 from 0-1 V.34 TX is disabled
    sw 27 bit 5 from 0-1 V.34 RX is disabled


    sw 29 bit 3 from 0-1
    sw 29 bit 4 from 0-1
    Used to set TX speed to V.17 14.4kbps

    sw 29 bit 5 from 0-1
    sw 29 bit 6 from 0-1
    sw 29 bit 7 from 0-1
    Used to set RX speed to V.17 14.4kbps

    sw 29 bit 8 from 0-1



    Please share any comments
    We also change on 66-1 SW 114 Bit 8 to 0 (Turns off external phone line)

  10. #10
    Trusted Tech 50+ Posts
    Join Date
    Mar 2018
    Posts
    55
    Rep Power
    14

    Re: List of Sharp softswitches

    Is there also a way to stop the energy-saving button from flashing (e.g. so that it lights up continuously instead of flashing)? Some people who sit with their desk directly in front of the MFP are driven mad by this

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here