Results 1 to 4 of 4

Thread: Sharp Spares

  1. #1
    Junior Member
    Join Date
    Feb 2024
    Location
    Aliwal North
    Posts
    3
    Rep Power
    0

    Question Sharp Spares

    Hi guys, can anyone maybe assist me with a part number for this rear plastic frame inside a Sharp MX-5051 I've looked up and down the parts manual but it doesn't seem to be in here

    20240212_112108.jpg

  2. #2
    Field Supervisor 500+ Posts mloudy's Avatar
    Join Date
    Oct 2015
    Location
    Greenville, OH
    Posts
    718
    Rep Power
    41

    Re: Sharp Spares

    I have looked for that before. In my Parts Guide it is shown in section V30 with no part#. It is way more than just the rear frame. I am not sure I would even attempt to swap out that frame though.

    We bought a used copier and they strapped it so tight to the side of the semi trailer that it cracked that frame at the right rear. It became a rental as I would never sell it.

  3. #3
    Technician
    Join Date
    Oct 2020
    Location
    New York
    Posts
    15
    Rep Power
    8

    Re: Sharp Spares

    I had one with 6 months of lease remaining that a tech improperly installed the fuser drive and cracked the frame. We got lucky and were able to use an epoxy to repair it. It lasted the remainder of its lease that way without issue. I was not able to source that frame at the time, nor do I think we could have easily done that repair anyway.

  4. #4
    Technician
    Join Date
    Aug 2015
    Location
    NYC
    Posts
    45
    Rep Power
    18

    Re: Sharp Spares

    Seems like it's a frame itself.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here